UNSOLVED
A
AdnanRaziKhan
1 Rookie
•
9 Posts
0
4054
August 5th, 2020 22:00
dell s5248f-on stack
I am new to Dell switches need help on the following please its urgent. I will need a config sample for that too.
Please also expain in Dell Stacking VRRP is required as in Cisco stacking switch will become logically one. In Dell stacking work as the same or both switch need to be configured separatly even after stack.
1) How to configure Stack on Dell dell s5248f TOR switches?
2) How to configure vlt port channel between the switches.
3) How to configure Vlans?
4) how to configure normal Port-channel.
5) how to configure trunk interface to connect with switch or server.
DELL-Josh Cr
Community Manager
•
9751 Posts
•
44575 Points
2844
0
Posted August 6th, 2020 10:00
Hi AdnanRaziKhan,
The user guide may be of some help. https://dell.to/2C2ge8O However if you are needing configuration help contacting sales for configuration consulting may be a good option.
AdnanRaziKhan
1 Rookie
•
9 Posts
2818
0
Posted August 7th, 2020 21:00
Can anyone share the configuration template in notepad for both switches? for the following requirement. New to dell switches and need to configure the following.
1) How to configure Stack on Dell dell s5248f TOR switches?
2) How to configure vlt port channel between the switches.
3) How to configure Vlans?
4) how to configure normal Port-channel.
5) how to configure the trunk interface to connect with switch or server.
Dell-DylanJ
6 Operator
•
2924 Posts
2787
0
Posted August 10th, 2020 08:00
Hello Adnan,
I would refer you to the guide that Josha shared.
1) How to configure Stack on Dell dell s5248f TOR switches?
Page 440 should assist in this
2) How to configure vlt port channel between the switches.
Pages 206, 686, 1035 look like they may have some helpful info. Page 1040 has a section titled "Configure VLT"
3) How to configure Vlans?
I would begin on page 155
4) how to configure normal Port-channel.
I would begin on page 156
5) how to configure the trunk interface to connect with switch or server.
I'm not sure I fully understand what you're looking for with this question. Could you clarify?
AdnanRaziKhan
1 Rookie
•
9 Posts
2876
0
Posted August 5th, 2020 23:00
It will be great if anyone can upload both switch configuration template