UNSOLVED
dell switch OS10 10.5.2.0 password encrypt
hi
Dell os10 10.5.2.0 newest version
in document, username password is encrypted as SHA-512 and converted as SHA-512 format in running config
but password is actually marked as ****
ex) username admin password **** role sysadmin priv-lvl 15
**** is not the format of SHA-512.
customer inquired about this situation. please help
thanks.
1661
0
Posted October 19th, 2020 23:00
any device of 10.5.2.0 version have the same issue.
(s4048, s3048, s4148)
whenever I make a username, before upgrade or after, have the same issue.
thanks.
1648
0
Posted October 20th, 2020 09:00
Did it do it on the previous firmware version? Can you private message me a service tag of one of the switches? It may be something that will need to be fixed in a future update.
1643
0
Posted October 20th, 2020 17:00
you can test with any device of 10.5.2.0 version.
I have 15+ 10.5.2.0 device(4 kind of), all of them have same issue.
in 10.5.1.4(1 before of newest version), encrypted password is shown normally, from 10.5.2.0 , password is shown as **** not encrypted password.
case 1) device 10.5.1.4 version used → upgrade on CLI → password changed encrypted words to **** in show running-config → make a new username → password is shown as ****
case 2) delete OS on ONIE → install 10.5.2.0 on ONIE → make a new username → password is shown as **** (default username admin's password is also shown as ****)
1627
0
Posted October 21st, 2020 10:00
Thanks for the info, i will need a service tag to do a full escalation of the issue.
DELL-Josh Cr
Community Manager
•
9741 Posts
•
44395 Points
1668
0
Posted October 19th, 2020 11:00
Hi,
Which model switch is it? Was the password created on an older version of the OS?