UNSOLVED

Mudassar Munir

updated

3 years ago

MM

Mudassar Munir

1 Rookie

3 Posts

0

891

January 8th, 2024 20:51

Ethernet 1/1/12 is up, line protocol is down

Hello All,

Please i need you assitance if anyone had the same situation ,i have pluuged one Cisco SFP 1G on the the switch (Dell s4128f-on) the problem is the its always showing that the  SFP28 type is SFP28 25GBASE-SR-AOC-100.0M ,and the line protocol is down,

I have used below commands but status is still same. 

TOR-05# configure terminal 
TOR-05(config)# allow unsupported-transceiver
TOR-05(config)# unlock third-party transceiver
TOR-05(config)# end
TOR-05# commit 
TOR-05# write memory

here is the show interface result 

TOR-05# show interface ethernet 1/1/12
Ethernet 1/1/12 is up, line protocol is down
Hardware is Eth, address is e8:65:5f:10:b5:0c
    Current address is e8:65:5f:10:b5:0c
Pluggable media present, SFP28 type is SFP28 25GBASE-SR-AOC-100.0M
    Wavelength is 16652
Interface index is 27
Internet address is not set
Mode of IPv4 Address Assignment: not set
Interface IPv6 oper status: Disabled
MTU 1532 bytes, IP MTU 1500 bytes
LineSpeed 0, Auto-Negotiation off
Flowcontrol rx on tx off
ARP type: ARPA, ARP Timeout: 60
Last clearing of "show interface" counters: 23 weeks 1 day 08:08:02
Queuing strategy: fifo
Input statistics:
     0 packets, 0 octets
     0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
     0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
     0 Multicasts, 0 Broadcasts, 0 Unicasts
     0 runts, 0 giants, 0 throttles
     0 CRC, 0 overrun, 0 discarded
Output statistics:
     0 packets, 0 octets
     0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
     0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
     0 Multicasts, 0 Broadcasts, 0 Unicasts
     0 throttles, 0 discarded, 0 Collisions,  wred drops
Rate Info(interval 30 seconds):
     Input 0 Mbits/sec, 0 packets/sec, 0% of line rate
     Output 0 Mbits/sec, 0 packets/sec, 0% of line rate
Time since last interface status change: 23 weeks 1 day 08:03:51

  • DELL-Joey C

    Moderator

    4170 Posts

    20965 Points

    0

    0

    Posted January 9th, 2024 05:48

    Hi,

     

    Do you have a picture of the Cisco SFP that you have used on port 12?

     

    What is the firmware/OS of your switch currently?

     

    Can you try running this command on interface level, #speed 1000 to check if it helps. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • Mudassar Munir

    1 Rookie

    3 Posts

    0

    0

    Posted January 9th, 2024 06:49

    Dear @DELL-Joey C​ 

    Unfortunately, I don’t have SFP Picture .  I will try to get it.

    I tried to with #speed 1000 it not help me on this firmware / OS

    Below is firmware / OS

    OS Version: 10.5.2.7
    Build Version: 10.5.2.7.374
    Build Time: 2021-07-28T04:48:16+0000
    System Type: S4128F-ON
    Architecture: x86_64

  • DELL-Joey C

    Moderator

    4170 Posts

    20965 Points

    0

    0

    Posted January 10th, 2024 00:44

    Hi,

     

    Can you please update the OS to 10.5.6.0, and you mentioned the command #speed 1000 did not help, did it give you an error or the media still shows 25G? Let us know more about the SFP when you manage to get a picture of it. 

    DELL-Joey C

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

  • Mudassar Munir

    1 Rookie

    3 Posts

    0

    0

    Posted January 10th, 2024 10:25

    @DELL-Joey C​ 

    It,s not giving any error . To upgrade i need to take approval that will take time from managment. 

    TOR-01# show interface ethernet 1/1/9 
    Ethernet 1/1/9 is up, line protocol is down
    Description: *TM-DDEI*
    Hardware is Eth, address is cc:48:3a:db:96:d6
        Current address is cc:48:3a:db:96:d6
    Pluggable media present, SFP28 type is SFP28 25GBASE-SR-AOC-100.0M
        Wavelength is 16652
    Interface index is 25
    Internet address is not set
    Mode of IPv4 Address Assignment: not set
    Interface IPv6 oper status: Disabled
    MTU 1532 bytes, IP MTU 1500 bytes
    LineSpeed 0, Auto-Negotiation off
    Flowcontrol rx on tx off
    ARP type: ARPA, ARP Timeout: 60
    Last clearing of "show interface" counters: 42 weeks 2 days 19:07:38
    Queuing strategy: fifo
    Input statistics:
         55760031 packets, 11815526640 octets
         1069 64-byte pkts, 41597330 over 64-byte pkts, 5314714 over 127-byte pkts
         4119630 over 255-byte pkts, 288635 over 511-byte pkts, 4438653 over 1023-byte pkts
         429901 Multicasts, 1608577 Broadcasts, 53721553 Unicasts
         0 runts, 0 giants, 0 throttles
         0 CRC, 0 overrun, 0 discarded
    Output statistics:
         211021133 packets, 48114599595 octets
         19289003 64-byte pkts, 154642771 over 64-byte pkts, 7483914 over 127-byte pkts
         5935351 over 255-byte pkts, 1888439 over 511-byte pkts, 21781655 over 1023-byte pkts
         80230106 Multicasts, 75865321 Broadcasts, 54925706 Unicasts
         0 throttles, 236 discarded, 0 Collisions,  wred drops
    Rate Info(interval 30 seconds):
         Input 0 Mbits/sec, 0 packets/sec, 0% of line rate
         Output 0 Mbits/sec, 0 packets/sec, 0% of line rate
    Time since last interface status change: 2 weeks 1 day 22:16:55


    TOR-01# show running-configuration interface ethernet 1/1/9
    !
    interface ethernet1/1/9
     description *TM-DDEI*
     no shutdown
     switchport access vlan 220
     speed 1000
     flowcontrol receive on