UNSOLVED
PowerConnect 2016 problems
Just put the 2016 in my LAN, running one port from router to the switch. Three of the other ports are going to computers. It was working just fine for a few hours, and then, all the LEDs would go solid and I lose network. Only way to fix it is to power cycle the switch. Is this a faulty unit? I have had to do this 2 times this morning. Please let me know... thanks!
GregG1
2 Intern
•
812 Posts
88
0
Posted February 20th, 2004 14:00
It sounds possible that there is a hardware problem with the unit. I would suggest contacting tech support at (800) 822-8965 and follow the prompts for Server and PowerConnect. The tech can do some troubleshooting when the switch stops passing traffic to determine if it needs to be replaced.