UNSOLVED
Closed
E
EricDoutreleau
1 Rookie
•
65 Posts
0
708
March 21st, 2023 06:00
private vlan and switch trunking
Hi
Hi have two dell powerconnect N2048 where i want to configure private vlan.
These two switchs are interconnected through 2 force10 4048-ON.
On the two powerconnect i have some vlans.
i want to transform one vlan in a private vlan.
the problem is that i can't make a trunk between one force10 and one N2048
when i want to configure the port channel between them by typing
conf t
interface po35
switchport mode private-vlan trunk
I got the following messages
% Error: Po 35 Port is part of a non-default VLAN
indeed there s another vlan tagged on this prot channel as the switch serves other vlan than just
the private one.
I m a bit puzzled. .
DELL-Charles R
Moderator
•
4730 Posts
•
25476 Points
204
0
Posted March 21st, 2023 12:00
Hello EricDoutreleau,
I think this may help:
User guide:
https://dell.to/42s1ho2
Change Switchport mode to Trunk mode in INTERFACE mode.
#switchport mode trunk
Enter the allowed VLANs on the trunk port in INTERFACE mode.
#switchport trunk allowed vlan vlan-id
Private VLANs:
Configure a PVLAN domain
Extend PVLAN domain to another switch
https://dell.to/3Z44Vlc
Please note we are unable assist directly in initial configurations, but we do have professional services which can help you to deploy the configuration you need. You may consider contacting Dell Sales department for a professional deployment if needed.
I hope the resources I am able to supply will be helpful for you.
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!