Solved!
Go to Solutionstack port errors (PowerConnect 6248)
Please see the logs below. What is that saying to me? Is the issue on the network or there is physical issue on the cable/port?
Buffer log:
Errors detected on Stack Port 1/xg1 (oldRxErrors = 3001 currentRxErrors = 3003 oldTxErrors = 0 currentTxErrors = 0).Use BRCM_escape_apos;show stack-port diagBRCM_escape_apos; to look at detailed statistics.
show stack-port diag:
1 - xg1:
RBYT:3e5cfaaa RPKT:9a4ba4b TBYT:e4c25325 TPKT:7d81423d
RFCS:bc0 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
1 - xg2:
RBYT:c2277bb1 RPKT:6b2c0473 TBYT:ea7e75d3 TPKT:4b0cf8ae
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
2 - xg1:
RBYT:32f4ae8 RPKT:17590db0 TBYT:dcc05da9 TPKT:330ea6d7
RFCS:1 RFRG:0 RJBR:0 RUND:0 ROVR:0
--More-- or (q)uit
TFCS:0 TERR:0
2 - xg2:
RBYT:1e243193 RPKT:7ca8563e TBYT:dce26ec1 TPKT:4bb4d53
RFCS:15 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
3 - xg1:
RBYT:670d9fbf RPKT:8553d2af TBYT:82112954 TPKT:b6b0d342
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
3 - xg2:
RBYT:fae703cb RPKT:d9fe988e TBYT:79ddb35 TPKT:b0647900
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
4 - xg1:
RBYT:25865503 RPKT:4f3df21b TBYT:27359088 TPKT:6e8f38a5
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
4 - xg2:
--More-- or (q)uit
RBYT:8210be41 RPKT:b6b0d2dc TBYT:670cbb4d TPKT:8553d1cd
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
thanks
mhigginson
1 Message
2576
0
Posted August 14th, 2014 16:00
bc0 is hex for 3008. It should correlate to currentRxErrors = 3003. Don't know why it doesn't match exactly on yours.
I'm having the same issue on a 6248 stack. Were you able to resolve the issue by re-seatting the cables/card?
jwojtow
7 Posts
2576
0
Posted September 8th, 2014 07:00
OK. finally I have found time for downtime. We had to add a new switch to the stack.
I have taken the cable from 1/xg1 and put it in the port 4\xg1 to connect to the new switch.
Also upgraded firmware to the latest one.
Outcome:
- There was no errors for 2 the first 2 days.
- first 8 errors happened today on the port 4/xg1
------------TX-------------- ------------RX--------------
Data Error Data Error
Rate Rate Total Rate Rate Total
Unit Interface (Mb/s) (Errors/s) Errors (Mb/s) (Errors/s) Errors
---- ---------------- ------ ---------- ---------- ------ ---------- ----------
1 xg1 554 0 0 288 0 0
1 xg2 820 0 0 972 0 0
1 xg3 0 0 0 0 0 0
1 xg4 0 0 0 0 0 0
2 xg1 428 0 0 298 0 0
2 xg2 291 0 0 549 0 0
2 xg3 0 0 0 0 0 0
2 xg4 0 0 0 0 0 0
3 xg1 53 0 0 17 0 0
3 xg2 295 0 0 435 0 0
3 xg3 0 0 0 0 0 0
3 xg4 0 0 0 0 0 0
4 xg1 971 0 0 821 0 8 <<<<<<<<<<<<<<<<<<<<<<<<<
4 xg2 18 0 0 52 0 0
4 xg3 0 0 0 0 0 0
4 xg4 0 0 0 0 0 0
5 xg1 973 0 0 818 0 0
5 xg2 818 0 0 973 0 0
------------TX-------------- ------------RX--------------
Data Error Data Error
Rate Rate Total Rate Rate Total
Unit Interface (Mb/s) (Errors/s) Errors (Mb/s) (Errors/s) Errors
---- ---------------- ------ ---------- ---------- ------ ---------- ----------
5 xg3 0 0 0 0 0 0
5 xg4 0 0 0 0 0 0
So that is physical cable fault. I will have to replace the cable.
Thank you all for helping in the investigations.