UNSOLVED
BCM V.92 56K Modem Initialization String
I have an Inspiron 5100 with the Broadcom V.92 56K modem and I can't connect any higher than 26.4Kbps!... My desktop has an AOpen modem that connects at V.90 using the same phone connection so I know that my phone line is good. I've updated the BCM drivers to current rev and no help. I've searched for initialization strings for the BCM modem but can't find any that force it to connect at V.90 - they only ones I found limit the modem to slower connection speeds.
HELP, I'm stuck in dialup ssslllooowww m o t i o n
552
0
Posted December 23rd, 2003 07:00
Well, this is an international disfunction ! I post the same problem under 'Inspiron8600 and modem' and I'm still waiting about an answer !!! What do you mean by 'fix' the modem ?Message Edited by Patoche on 12-23-2003 03:58 AM
552
0
Posted December 24th, 2003 07:00
When I test the modem by AT command AT+GMM my intern modem return H.324 video-ready rev. 1.0. When I do the same on my external modem I get V90.
What about you ?
552
0
Posted December 26th, 2003 15:00
No, this problem has not been fixed.... I've gone through several rounds of 'help' from Dell Technical Support - everything you read in the papers about the problems with Dell outsourcing their help centers to India is TRUE. The only 'help' that I received were emailed links to their online support documentation on "How to connect your modem to the phoneline" and "Why no modem can really connect at 56K".
After beating my head against the wall with tech support people that had no comprehension of the problem, they finally decided to send me a replacement modem - when the modem arrived it was just that, a modem card and nothing else. No instructions about contacting a service tech to have it installed, no self-installation instructions, NOTHING. This was especially annoying since they didn't replace it with the same BCM modem, they sent me a Conexant D480 MDC v.92 modem (slightly difficult to download the drivers for your new modem without a working modem...)
Connection speeds are still slow, but the Conexant connects at 33.6kbps which is better than the BCM. I borrowed a Xircom PCMCIA modem from a friend and it will connect at v.90 AND downloads at 44kbps... Since these modems are much cheaper than the therapy bills from dealing with Dell, I am going that route.
Dell can write me off as a repeat customer, it is unfortunate that they choose not to stand behind their product and treat their customers so poorly.
Message Edited by znn94x on 01-05-2004 11:42 PM
552
0
Posted December 26th, 2003 20:00
You will not void the warranty on the modem swap, but I have an inspiron 5100 that was orginally configured with a Conexant modem and it went out after 3 months of factory install. Dell shipped me a Broadcom modem for me to install and said it would not void the warranty for the customer to swap the modem. The problem is... the modem shows up in the Device Manager as just a PCI modem and the drivers will not install to use the modem. How in the world did you even get yours to work in the first place?552
0
Posted December 27th, 2003 00:00
Sorry--that is go to Add/Remove Software and uninstall any modem software.552
0
Posted December 27th, 2003 00:00
Try this:
1. Go to device manager and uninstall the modem DO NOT REBOOT
2. Go to the Add/Remove Hardware and uninstall any modem software.
3. Go to Control Panel and Remove any modems showing up there
4. Now install the Broadcom software
5. Reboot your computer and look to see if the new hardware is recognized as a BCM
or check in the Device Manager for BCM modem
552
0
Posted December 27th, 2003 01:00
Thanks ProfKodi, I did all that several times... we are still with modem and no drivers. This is definitely frustrating. I can't imagine anything I've missed.552
0
Posted December 28th, 2003 21:00
Hi,
see following links:
http://www.modemsite.com/56k/bcm.asp
http://support.ap.dell.com/docs/comm/p48210/
I use DELL inspiron 8600 and XP Prof. With Init-String "ATX0S61=0S37=0S50.4=0" I get a 48kb/s connction.
210
0
Posted December 29th, 2003 10:00
Well, I have tried your Init-String, but it doesn't work for me ! I'm always connecting at 37,2 kb/s with my internal modem. I'm gonna loose my head....
Inspiron 8600 - Centrino 1.5 - XP home
Message Edited by Patoche on 12-29-2003 06:59 AM
Message Edited by Patoche on 12-29-2003 07:08 AM
ProfKodi
3 Posts
552
0
Posted December 22nd, 2003 13:00
Hi, did you ever fix your slooooow BCM V.92 56K (ha ha ) modem? I am having the same problem.