UNSOLVED

Arkleseizure

updated

22 years ago

0

13387

December 27th, 2004 00:00

Big time error.

I recently recieved a Dell Inspirion 9200 with a free Intel PRO/Wireless 2200 Internal Wireless (801.11 b/g, 54mps) card a Linksys Etherfast Cable / DSL Router (Model: BEFSR41) an a Linksys Wireless-G Access Point (Model: WAP54G) for the holidays. Since you know the specs, here is my questions:

1. Is the access fully 802.11g/b compatible?
2. Is the router compatible with the access point?
3. How did a brand new router not work? (Confirmed by Linksys)
4. Why does the access point software refuse to install? (Says network card error)
5. Why does the Intel control center say there is no network card installed?

If those questions can be awnsered, it would be greatly appreciated.
  • johnallg

    2 Intern

    •

    7280 Posts

    651

    0

    Posted December 27th, 2004 00:00

    1.  Yes
    2.  Yes
    3.  Not unknown, it does happen...
    4 & 5.  Look at the mini-PCI clot and verify there is a card there - if not call Dell - if so, remove it and fully reinsert it into the slot.

    Post back if still having problems.

  • 651

    0

    Posted December 27th, 2004 01:00

    Thanks for your help, will do tommorrow.
  • 651

    0

    Posted December 28th, 2004 22:00

    The card is lodged into the PCI slot, anyway to get it out without forcing it?
  • johnallg

    2 Intern

    •

    7280 Posts

    651

    0

    Posted December 28th, 2004 23:00

  • 651

    0

    Posted December 29th, 2004 14:00

    Danke Sehr.


    (Thank you.)
  • 651

    0

    Posted December 29th, 2004 14:00

    fgfdsgsfksdfjs!!!

    (I don't curse, I type in scribbles.)

    Yet, I did what the documentation said to do, no luck. My 21 day satisfaction is out on it too, can I return the Wireless Card/Wireless Access point back to Dell, on just my 3 year warranty?
  • johnallg

    2 Intern

    •

    7280 Posts

    651

    0

    Posted December 29th, 2004 19:00

    Pushing the two metal clips away from the board wouldn't allow the board to pop up and be removed?  If not, it is probably in crooked (jambed) and that also explains why it doesn't work.  If that is true, I would use Dell Chat and relate what you are experiencing.  Dell Chat is so much more useful than callling on the phone to India.
  • 651

    0

    Posted December 30th, 2004 00:00

    I tried that, before this. Dell chat said I was lame.....literaly....they wouldn't help me.