UNSOLVED

oceklund

updated

21 years ago

O

oceklund

1 Rookie

•

10 Posts

0

21684

October 18th, 2005 15:00

Connection speed

Hi, I am using wireless 1350 mini pci card on my inspiron 5160. I am loosing connection speed from 54Mbps to 1.0 Mbps in seconds. Do enybody knows why? What can I do? Thanks.....
  • volcano11

    2 Intern

    •

    27973 Posts

    308

    0

    Posted October 18th, 2005 15:00

    Do you have any devices that operate on the 2.4 Ghz frequency that may be interfering with the router (2.4 Ghz cordless phones microwave ovens)?  If so, thry changing the router's channel to one of the extreme channels (1 or 11).  Are you within line of site of the router (i.e. is there anything blocking the signal between your computer and the router?

    Steve

  • oceklund

    1 Rookie

    •

    10 Posts

    308

    0

    Posted October 18th, 2005 18:00

    Hi Steve,

    I have changed the channel to 11 on my router. We do have a wireless phone, but we bought it some time ago and this started to happend just a few days ago. The router and my lap top have direct connection.

  • volcano11

    2 Intern

    •

    27973 Posts

    308

    0

    Posted October 18th, 2005 20:00

    What do you mean by the following statement ?  "The router and my lap top have direct connection."

    Steve

  • oceklund

    1 Rookie

    •

    10 Posts

    307

    0

    Posted October 19th, 2005 13:00

    there is nothing in line of site between the router and my lap top.
  • volcano11

    2 Intern

    •

    27973 Posts

    307

    0

    Posted October 19th, 2005 14:00

    Try going to Device Manager, uninstalling the wireless card, rebooting and then reinstalling the drivers for the card.

    Steve

  • oceklund

    1 Rookie

    •

    10 Posts

    307

    0

    Posted October 20th, 2005 11:00

    Hi Steve

    Everything is vorking fine after changing channel. Thank you for your advice.

  • hauptm

    1 Rookie

    •

    11 Posts

    159

    0

    Posted October 20th, 2005 16:00

    Thanks for the replies.
     
    Yes..thanks.  I am aware you can change the channel in the router.  However, being new to the Dell wireless adpaters I wasn't sure if the adapter's IBSS channel came into play anywhere in the mix.
     
    btw...I'm using a Linksys wireless router with SRX.  My Linksys adapters work great at 108mps as well as a Netgear my son has at 54mps.  However, I've noticed a slight decrease in speed with my new Dell 1370 adapter which is supposed to run at 54mps.  On occasion, it flip flops in a range of 36mps - 54mps being just two feet from the router.
     
    I was hoping I was on to a possible solution with this particular thread.

    Message Edited by hauptm on 10-20-2005 12:53 PM

  • hauptm

    1 Rookie

    •

    11 Posts

    307

    0

    Posted October 20th, 2005 16:00

    Was the value you changed called "IBSS Channel Number" found in the wireless adapter's properties?
     
    If not, where did you change the channel number?
     
    What exactly did you do? 
     
    Did you change your router and adapter both to a different channel or did you simply change your adapter's channel to match that of the router?
  • oceklund

    1 Rookie

    •

    10 Posts

    307

    0

    Posted October 20th, 2005 16:00

    Hi,

    I changed the channel in the router program.

  • oceklund

    1 Rookie

    •

    10 Posts

    159

    0

    Posted October 20th, 2005 16:00

    Well, in my case the speed after changing channel stays between 54 and 36 Mbps. This is ok for me.

    The problem was dropping from 54 to 1 in seconds causing no respons from internet or in the wireless network.