UNSOLVED

SassygalNC

updated

19 years ago

S

SassygalNC

2 Intern

•

149 Posts

0

16091

May 16th, 2008 03:00

Need a wireless router

I have a Dlink wireless router and my lap top keeps getting booted off net or I get can not display this page cus ur not connected to internet which it shows i am. My signal strenght goes from excellant to very good to good and fair. My router is near lap top so I know its not out of range. Also my son's pc has a desktop which has the card for the wirelss dlink and I am in need of another one. my questin to that is: IF i get a new router will my son's still work with the new wireless if its a diff brand of wirelss router? Also any suggestions on what is a good wireless router to purchase? I've heard D-Link is no good but I don't know. any suggestions/advice is greatly appreciated.

thanks

 

PS I have Intel pro/set wireless card on my laptop (inspiron 9300) could it be that causing the problems if so how do i change it?

Message Edited by SassygalNC on 05-15-2008 11:51 PM
  • jmwills

    2 Intern

    •

    11984 Posts

    279

    0

    Posted May 17th, 2008 03:00

    Before spending any money unnecessarily, lets check some settings on thw wireless setup.  Make sure the cards are set to only connect to preferred networks.  The Windows utility has a bad habit of always trying to find a better signal unless you make the above configuration change.

     

    If you are using the Dlink utility, it should not stray form home so to speak.  Check for updates for the router firmware and drivers for the cards.

     

    If you want a new router, a lot of perople here will agree that Linksys has always been a strong performer.  I have several of their products and currenly use the WRT54G model.

  • SassygalNC

    2 Intern

    •

    149 Posts

    279

    0

    Posted May 18th, 2008 01:00

    I was thinking of going with the lynskys. Do I do all this on the main desktop? the one that is directly connected to the router? I've not done much with the routers...they confuse me sometimes lol

    thanks for posting

  • jmwills

    2 Intern

    •

    11984 Posts

    279

    0

    Posted May 18th, 2008 06:00

    The desktop or any wired machine can setup the Linksys router from a web address:

     

    http://192.168.1.1

     

    username:  leave blank

    password:   admin      (this is soemthing you need to chnage)

    Message Edited by jmwills on 05-18-2008 09:04 AM
  • SassygalNC

    2 Intern

    •

    149 Posts

    279

    0

    Posted May 18th, 2008 18:00

    I dont have Lynskys i have d-link
  • Davet50

    6 Operator

    •

    14442 Posts

    279

    0

    Posted May 18th, 2008 18:00

    Same principle only address is 192.168.0.1
  • SassygalNC

    2 Intern

    •

    149 Posts

    279

    0

    Posted May 18th, 2008 19:00

    When I went to the dlink and typed in admin and u said leave the username blank

    it wouldnt let me go in

    also where do i go to update the firmware and do I just update it on the wired computer or both it and the wireless ones?

    thanks

  • SassygalNC

    2 Intern

    •

    149 Posts

    279

    0

    Posted May 18th, 2008 19:00

    Thanks alot

    btw love your idiot quote...gave me a lil laugh

  • DeathRider

    549 Posts

    279

    0

    Posted May 18th, 2008 20:00


    @SassygalNC wrote:

    When I went to the dlink and typed in admin and u said leave the username blank

    it wouldnt let me go in

    also where do i go to update the firmware and do I just update it on the wired computer or both it and the wireless ones?

    thanks




    There should be a page in your router setup to update the router's firmware and be able to "browse to find the file on your computer. You need to do this with a wired connection NEVER WIRELESS There is too great a chance you will get *disconnected* during the flash.

    You only update the router firmware once for each version. Unless you are referring to updating the firmware on your network cards....

    It's either no username and *admin* for the password or *admin* for username and no password.

    If you are still having problems, there should be a reset button on the router.
    Message Edited by DeathRider on 05-18-2008 05:52 PM
  • Davet50

    6 Operator

    •

    14442 Posts

    279

    0

    Posted May 18th, 2008 21:00

    what model d-link router do you have?

    The user name should be admin and the password should be blank.

  • ronss

    2 Intern

    •

    2060 Posts

    •

    3 Points

    218

    0

    Posted May 18th, 2008 22:00

    you sons computer will not need a ethernet card, unless you are going wireless n....your laptop should be okay for your new router,  if you go wireless n, then your laptop will have to wireless n stanard mini-card , or it will not work.

     

    i have a neatgear wpn 824, mimo, i really like it... d-link makes some good routers-

    http://www.newegg.com/Product/Product.aspx?Item=N82E16833150015

     

    here is a good linksys,,,

     

    http://www.newegg.com/Product/Product.aspx?Item=N82E16833124136

     

    also, the wrt54g linksys is very good router

     

    this d-link gets good reviews, but its wireless n, so if your laptop mini-card   doesn,t support wireless n,,you would have to upgrade your laptop network mini-card

     

     

     http://www.newegg.com/Product/Product.aspx?Item=N82E16833127215

     

     

     

    Message Edited by ronss on 05-18-2008 06:58 PM
    Message Edited by ronss on 05-18-2008 07:13 PM