I have just installed a PE 2650 (with Windows 2000 and Exchange 2000) last weekend and got major networking problems two days later. I'm using the build it network cards.
It started by random clients not being able to ping the server for periods. Later the clients could not ping IP addresses on two other servers (PE 2400/W2k and PE1300/NT4). It's not the main IP address, but the second in the list. The main IP on those servers always work as well as some other IPs.
The 2650 server does not report any network problems in log files other than misc applications that cannot reach other servers. I've tried with both on board network cards. I have not had the time to test with a PCI network card yet.
I suspected that the two 3Com 4228G switches we use were causing this, so I changed to an old 3Com hub. The problem is still there!
When I remove the 2650 server the other two servers still have problems.
I have absolutely no clue what is causing this. The 2650 is the only change to our network...
another thing to watch out for is the ERA, if connected it can cause DNS problems. creates a WINS and DNS PPPoE entry that can potentially cause routing issues, there is a work around for it. contact Dell server support for the fix if you suspect the ERA is contributing to your problem.
Something that I can add to this, I've run PERFMON on the server and found a very high Output Queue Length value for the network interface. I've not been able to figure out how to bring this down, but it's a place to start.
John Matteson
6 Posts
267
0
Posted January 16th, 2004 14:00