lightning knocked out local telco office a few adays ago. eversince my line came back in service my dialup internet connect is very sluggish and disconnects often. i have same problem with another modem and with both netzero and aol. i know it's the dial line causing my problem but telco says it meets their specs. the line sounds good. anythoughts anyone? i have an antique dell deminsion
Getting the phone company to even see a problem on a standard voice grade dial up telephone line is a major accomplishment. The lines are not really guaranteed for dial-up data service and usually if you call them and they hear you talking OK on the line and you tell them you have a modem issue they don't want to hear it.
However, along with what happened at the Telephone company with the lightning hit, your "house" wiring (inside the house and the customer's responsibility) could have been affected too.
A couple things you can do is disconnect all voice telephones in the residence and then see if that makes a difference (in case one of the telephone got hit and is causing the problems). You can also try a different Telco wall jack in the house and see if that makes any difference. If none of that helps, it's going to take persistence and getting the right telco person to really check the line (Call every day and sometimes they will get tired of you calling and really check it out or if there are a certain number of problem calls it can be considered "chronic"). I used to work with "Data" circuits and we could ask for a "Class A" inspection of the line, I don't know if they will do that for a dial-up voice circuit but it's worth asking.
Message Edited by fireberd on 04-24-200607:32 PM
Inspiron 16 5630 Laptop and WD22TB4 Docking Station
Self-built desktop for recording studio application
i tried the things you mentioned. no help. i know even a POT s line has some basic conditioning spec. i guess I have no choice but to the bug them to death i suspect they've rerouted my new line thru nome alaska. i'm pretty sure I have a delay problem, as some testing I have done indicate such.
A voice line is a basic "3002" voice grade circuit. There are some parameters but very few.
Distance is a factor and the number of "hops" (repeaters) can affect modem speed. But, since it got zapped with lightning there could be carbon block problems and whatever that may not show up with just a cursory test. More in depth testing is needed to find those.
Inspiron 16 5630 Laptop and WD22TB4 Docking Station
Self-built desktop for recording studio application
fireberd
11 Legend
•
33399 Posts
•
112848 Points
230
0
Posted April 24th, 2006 22:00
Getting the phone company to even see a problem on a standard voice grade dial up telephone line is a major accomplishment. The lines are not really guaranteed for dial-up data service and usually if you call them and they hear you talking OK on the line and you tell them you have a modem issue they don't want to hear it.
However, along with what happened at the Telephone company with the lightning hit, your "house" wiring (inside the house and the customer's responsibility) could have been affected too.
A couple things you can do is disconnect all voice telephones in the residence and then see if that makes a difference (in case one of the telephone got hit and is causing the problems). You can also try a different Telco wall jack in the house and see if that makes any difference. If none of that helps, it's going to take persistence and getting the right telco person to really check the line (Call every day and sometimes they will get tired of you calling and really check it out or if there are a certain number of problem calls it can be considered "chronic"). I used to work with "Data" circuits and we could ask for a "Class A" inspection of the line, I don't know if they will do that for a dial-up voice circuit but it's worth asking.
Message Edited by fireberd on 04-24-200607:32 PM