I decided to upgrade the CPU on my Optiplex 760 DT from a C2D E8400 to a C2Q Q8400. But then when I did it, diagnostics 3 and 4 blinked, and the power button was orange. I tried removing the ram and putting it back in. Still the same thing. When I put the old e8400 back in, diagnostic lights 2 3 and 4 started blinking, and power button was yellow. Anybody can help?
The Optiplex 760 uses two motherboards - T674K Non-Quad core CPU motherboard U562N Quad core CPU motherboard
Look on the motherboard near the PCI-E 16x slot there is a little sticker that says the motherboard P/N if it is the one "T674K " then that's why it won't boot. If it is the other one try reseating the CPU should boot after that.
I found out that I didn't install the CPU correctly. Today, I installed the CPU again correctly after watching "How to install LGA 775 CPU" videos, I got the Optiplex 760 working with the Q8400, and that actually solved the problem.
I'm looking at moving up to a Quad on the same motherboard....0R230R. Did the Q8400 work long term? Are all 4 cores operating? I can't seem to find much info on the 0R230R motherboard capabilities and sometimes the capabilities can be exceeded.
WM1000
20 Posts
3128
0
Posted March 10th, 2018 14:00