Hello, when I plug in an Intel Network Adapter X550-T2 my dell OptiPlex 780 says that I can't use Display port at the same time as this PCI-Express card. Can anything be done to resolve this? Grateful for answers
Hello, as Brad pointed out, the network card may have been installed on the video graphics slot. The system could be confused and the error message indicating that you can't connect both of the onboard and dedicated graphics at the same time. If that was the cause, moving the network card to a different slot may solve the problem.
If that was the cause, moving the network card to a different slot may solve the problem.
Agreed.
Or disable the on-board network card. Having two NICs in system is an unusual config.
Last question is why install a PCIe-NIC if it has an on-board one?
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
The Setup and Features Information manual for the 780 states (page 7): "NOTE: The PCI Express x16 slot is disabled when a display is connected to the integrated DisplayPort connector." (I don't think the card will fit in any other slots; it's apparently a 10-Gbit card.)
bradthetechnut
9 Technologist
•
9709 Posts
•
40915 Points
766
1
Posted September 21st, 2022 13:00
Compatibility issue; see screengrabs: