UNSOLVED

donter

updated

4 years ago

D

donter

6 Posts

0

906

July 23rd, 2022 00:00

Wont boot up

Hello, whenever I turn on my computer it says scanning for signal, no signal found then it starts up and shows the dell logo for a second then goes black screen and does the same thing over and over again. Please help anyone

  • redxps630

    11 Legend

    •

    16434 Posts

    •

    83185 Points

    396

    0

    Posted July 23rd, 2022 06:00

    First try replace cmos battery with a brand new CR2032.  Then try clear cmos settings by motherboard ”clear cmos” jumper.

    https://www.dell.com/support/manuals/en-us/optiplex-3050-desktop/optiplex-3050-desktop-sff-om/system-board-layout?guid=guid-8fe1ea7f-428e-4c10-a496-7cdb4ab74b65&lang=en-us

  • donter

    6 Posts

    390

    0

    Posted July 23rd, 2022 11:00

    Uhm alright a lot confused so can you please help me out on how to do that?

  • redxps630

    11 Legend

    •

    16434 Posts

    •

    83185 Points

    384

    0

    Posted July 23rd, 2022 20:00

    remove cmos battery:

    OptiPlex 3050 Small Form Factor Owner's Manual | Dell US

    Locate the CMOS jumper by referring to the motherboard manual and how to clear the CMOS. In general, the CMOS jumper is three pins located near the battery. In general, CMOS jumper has positions 1–2 and 2–3.Move the jumper from the default position 1–2 to position 2–3 to clear CMOS.

    #17 Clear CMOS jumper

    redxps630_0-1658634745888.jpeg

     

     

  • donter

    6 Posts

    381

    0

    Posted July 23rd, 2022 23:00

    Alright I figured out how to do this and I did it I cleared it I changed the battery as well. But i powered it back on and it was say continue with setup and to change date and time so it took me there and I did that , I exited out and it still doing the same thing. Any thing else u recommend doing pls help

  • ann_droid

    2 Intern

    •

    508 Posts

    374

    0

    Posted July 24th, 2022 05:00

    Hi

    Can you initiate any Diagnostics?

     

    My thoughts are a failed/failing/missing storage device.

    No HDD/SSD.

  • redxps630

    11 Legend

    •

    16434 Posts

    •

    83185 Points

    373

    0

    Posted July 24th, 2022 05:00

    looks like no POST despite clearing cmos.  now remove all hdd ssd as it was suggested already.  Remove all usb devices.  Remove discrete gpu if any.  Remove all memory sticks and reinstall only one memory in DIMM1.  Test each memory in this way.

  • donter

    6 Posts

    367

    0

    Posted July 24th, 2022 08:00

    I greatly appreciate your help rn but please  explain in terms I will understand 

  • donter

    6 Posts

    283

    0

    Posted July 24th, 2022 08:00

    I ran a diagnostic test and it said everything was fine and it found no issues

  • bradthetechnut

    9 Technologist

    •

    9712 Posts

    •

    40924 Points

    358

    0

    Posted July 24th, 2022 17:00

    You only have 2 RAM (memory) sticks at the most.  Remove the 2nd one and see if it boots.  If not, try replacing the one RAM stick with the other and see if it boots.  Remember to have PC unplugged from electrical outlet any time working on the inside of it.  I'm not 100% sure it's the RAM, so...

    Here you'll find a couple of no POST, no boot troubleshooting guides:  https://www.dell.com/support/home/en-us/product-support/product/optiplex-3050-desktop/docs

    Screenshot_20220724-193639.png

     

    If there's any terms you need the definition for, they can always be Googled.

     

  • donter

    6 Posts

    178

    0

    Posted July 24th, 2022 19:00

    I cant do that and switch between them tho i only have one