Solved!
Go to SolutionO
openaspace
13 Posts
0
932
August 8th, 2016 05:00
Idrac6 select boot from percRadi6 or internal single sata Disk
Hello,
I have a DELL T310 with idrac6,
one raid array with XenServer and one single sata disk with windows 10 directly connected to the sata motherboard port.
I want to select the first boot device from the perc control pannel to start xen or windows 10, but I can't figure out how to do, I have tried all boot options from the perc web control pannel.
I need to somethings in the bios to perform this action?
Thanks.
510
0
Posted August 8th, 2016 10:00
Hi,
In the BIOS under boot settings there is a boot sequence option and it may separate the onboard drive and the PERC.
510
0
Posted August 8th, 2016 10:00
Hello.
Yes it's ok from the bios, but I mean select the raid or single sata disk directly from the web interface of the access controller 6 - express, in a remote way.
DELL-Josh Cr
Community Manager
•
9694 Posts
•
43679 Points
510
0
Posted August 8th, 2016 14:00
There are not any additional options than the ones that you are seeing on that screen.