Solved!
Go to SolutionPowerEdge C6145 PXE Boot Error
Hello, we are installing new NIC's on our PowerEdge C6145 servers and when we attempt to PXE boot the servers we receive the following error:
PXE-EC8: !PXE structure was not found in UNDI driver code segment.
The cards we are attempting to use are Intel Ethernet Converged Network Adapter X540-T1 (https://www.newegg.com/intel-x540-t1/p/N82E16833106144)
Any ideas on what could be causing this?
Thank you
Dell-DylanJ
6 Operator
•
2924 Posts
1006
0
Posted August 21st, 2020 14:00
Hello,
Based on a search of the error, it looks like it would be a problem with the card, specifically the firmware on the card. I'm basing this on the Intel Boot Agent User guide that I found on a university website. I'd try flashing the firmware.
mwhalen
2 Posts
934
0
Posted August 27th, 2020 11:00
Thank you for the reply, flashing the firmware did not fix the issue in this case. It turns out that I had to disable 64-bit BAR (Base Address Register) addressing on the card using the Intel Ethernet Flash Firmware Utility with the -64d option.