I installed PP on Linux and got the error shown below. The system does not have any SAN disks attached yet. Is there something I should do to the system before zoning it to the array? Thanks.
[root@naln05rh-tmp etc]# powermt version
EMC powermt for PowerPath (c) Version 5.6 (build 143)
[root@naln05rh-tmp etc]# uname -a
Linux naln05rh-tmp.firm.jonesday.net 2.6.18-308.el5 #1 SMP Fri Jan 27 17:17:51 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
So "powermt display dev=all" shows nothing? Not even a phantom device?
Check out your "/etc/redhat-release" file... I'm thinking it may have been tweeked in some way... It should just be one line.. something like "Red Hat Enterprise Linux Server release x.y(name)"
If it has anything else, powerpath will fail to start...
Have you tried PowerPath Configuration Checker on downlaod from Online support to see if it can help you? (You need run EMC Grab first). Personally I suspect there was powerpath installed and didn't uninstalled clearly on you host...
cincystorage
2 Intern
•
467 Posts
1044
0
Posted July 9th, 2013 07:00
I've only seen that error when a file system is mounted on a device controlled by powerpath.
"powermt display dev=all" isn't showing any attached storage?