Start a Conversation
UNSOLVED

mrhat557

updated

7 years ago

M

mrhat557

1 Rookie

•

3 Posts

0

9931

May 21st, 2019 10:00

Adding a second NVME in the front flexbay of Precision 5820

Hello,

I have a Precision 5820 Workstation, which came factory installed with Windows 10 on a Samsung SM961 256 GB M2 NVME PCIE SSD. It is in a M2 Module in the top right FlexBay slot. The Flexbay slot next to it (top right)is also configured for an M2 Module. I purchased another M2 carrier for the other FlexBay slot, and a HP EX950 2TB M2 NVME PCIE SSD. 

I have not been able to get the workstation to recognize the drive. The power light on the M2 module lights up green, but the HDD light never comes on. I Updated all existing system drivers and BIOS, and also tried changing the RAID settings to AHCI. 

My experience is somewhat minimal, so this was all I knew to do.

There are also two SATA HDDS- a 2.5" SSD and a 3.5" mechanical HDD in the bottom front two FlexBay slots below the M2 module slots. Not sure if that makes a difference or not.

 

Any help would be greatly appreciated!

 

 

 

  • M

    mrhat557

    1 Rookie

    •

    3 Posts

    8747

    0

    Posted May 22nd, 2019 09:00

    Resolved.....teeth were not fully inserted into module carrier. (facepalm). 

  • P

    patricksyn

    5 Posts

    8692

    0

    Posted June 4th, 2019 14:00

    Where did you get the M.2 Module? I've been working with tech support and sales for over 2 months, and they insist the module isn't available...

     

    thanks!

  • M

    mrhat557

    1 Rookie

    •

    3 Posts

    8688

    1

    Posted June 4th, 2019 15:00

    Patricksyn, I had the same problem. I ended up finding one on ebay. They are on there pretty frequently if you search for part numbers DPWC700 or 66XHV. 

     

    Hope this helps!

  • P

    patricksyn

    5 Posts

    8681

    0

    Posted June 4th, 2019 19:00

    Awesome, that helps immensely!

  • C

    craigdallen

    8 Posts

    8615

    0

    Posted June 15th, 2019 20:00

    I have the exact same problem..

    Can you describe in more detail how you resolved this?

     

    Thanks...

  • A

    ALEXTSE

    1 Message

    5646

    0

    Posted July 3rd, 2020 13:00

    Never purchase again!

  • C

    code_rp

    4 Posts

    5057

    0

    Posted September 17th, 2020 18:00

    Can anybody help me to find the M.2 SSD carrier which can set the NMVE drive. Also is that compatible to the port already in there on top left felxbay (top right factory installed same as you stated). (dell precision 5820 Tower). Thanks a lot.

  • E

    EVOL305

    4 Posts

    4598

    0

    Posted November 21st, 2020 21:00

    How did u figure that out? Mine won’t work. Don’t understand why. How do you know what flex bay slot supports m.2?

Dell Support Resources

Latest Solutions

View More