UNSOLVED

Allen80

updated

8 years ago

A

Allen80

1 Rookie

•

2 Posts

0

1497

September 4th, 2018 19:00

Adding ODD to Precision 5820 Tower

I just purchased a Precision 5820 Tower without an ODD and would like to add an ODD that I had on hand.  The problem is that I cannot find a power connector to use for adding the drive.  Can anyone tell me what I need to accomplish this?

  • tphillips63

    4 Apprentice

    •

    2629 Posts

    •

    7922 Points

    1171

    0

    Posted September 9th, 2018 08:00

    Hello,

    6in Slimline SATA to SATA Adapter with Power

    Your system should have the power and cable for a slim line optical installed with two screws that you can remove to get to the slim SATA with power connector and this adapter will convert it to a regular SATA with power and should reach an add in SATA optical drive.  

    I did this with mine.

  • Allen80

    1 Rookie

    •

    2 Posts

    1162

    0

    Posted September 9th, 2018 11:00

    Will this work if the system also has a slimline drive installed?

  • LarryDaj

    1 Rookie

    •

    3 Posts

    606

    0

    Posted July 1st, 2020 13:00

    The cable you refer to on Amazon is opposite to what is needed.

    You need a slimline sata/power male connector and a sata/power female connector since you will be connecting it to the existing slimline sata/power female connector removed from the slot where a slimline drive would go and then connecting the sata end to the ODD drive in the 5.25 inch bay.

    I bought the cable you referred to but had to return it and then bought the correct one also from Amazon.