Solved!
Go to Solution0
0
Posted November 27th, 2024 07:04
@Chino de Oro This is the card in question.
Evga GeForce RTX 2080 TI FTW3 Ultra (11G-P4-2487-KR)
That’s why I wanted to ask. Cause it’s a pretty big card.
0
0
Posted November 27th, 2024 07:22
According to EVGA site, that specific card has the following dimensions:
The height of 5.48" is an issue. The stabilizer bar on your 7820 side panel may need to be knocked out for the panel to close properly
For some reason, the measurement specs kept disappeared after posting. Attached a picture instead.
(edited)
0
0
Posted December 4th, 2024 21:50
@Chino de Oro Appoligizes for such a late response. Especially on something marked with a right answer. But when you say stabilizer bar. Are you referring to the black piece that screws into the door. Or are you referring to the metal piece that’s made into the door that the black piece screws to.
0
0
Posted December 4th, 2024 23:58
For oversize cards, removing the black stabilizer bar first. If necessary, drill out the rivets and remove the metal frame.
Chino de Oro
11 Legend
•
8458 Posts
•
46451 Points
0
0
Posted November 27th, 2024 04:48
There is no issue with using larger than double slot cards. The 7820 was validated to be used with dual double slot cards. Just need to concern about the length and the height for chassis fitments.