UNSOLVED

chemgeek31

updated

3 years ago

Closed

0

342

June 27th, 2023 00:00

Precision 5820 SATA question

If I simply unplug the SAS RAID card and SAS break out cable in my system feeding the four front HDDs, can the cables from the drives to the breakout cable simply be used as SATA cables and plug into the motherboard SATA ports?  I want to run TrueNAS Scale or Unraid and don’t need the RAID card. I read all the storage upgrade articles and it is quite confusing.

  • Chino de Oro

    11 Legend

    •

    8567 Posts

    •

    47218 Points

    124

    0

    Posted June 27th, 2023 18:00

    Dell used propriety backplane for the flexbay, and so are the cables connectors.  In general, SAS ports will work with SATA drives.  If you are able to connect SATA cable to the backplane, then it should work.

    Any screenshots of the setup will help with better accuracy of the assessment.

  • Chino de Oro

    11 Legend

    •

    8567 Posts

    •

    47218 Points

    116

    0

    Posted June 27th, 2023 19:00

    Exactly, if you could connect SATA cables to SAS backplane, it will work with SATA drives.

  • 122

    0

    Posted June 27th, 2023 19:00

    So, I simply unplugged the potential 4xdata cables that come from the flexbay (have SATA ends on them) from the SAS RAID card and removed the card and splitter cable.  I plugged the 4xcables into the motherboard SATA ports and installed a good old 3.5" SATA drive and botted up.  The motherboard SATA controller recognized the drive.  So, I guess I answered my own question that those cables coming from the flexbay are just SATA cables that can interface with the SAS RAID card.