rjnd

updated

7 years ago

R

rjnd

2 Posts

0

2020

July 14th, 2019 11:00

Precision T7500 - MTP boot room, no supported devices found

I had a motherboard problem before and got a new motheroard and a new ssd installed. Since then, I've been having that warning. Any help is appricated. it has been a few years, eveything work just fine but I keep having that annoying message. thanks.Screenshot_20190714-213930_Gallery.jpg

  • bmcowboy

    4 Apprentice

    573 Posts

    1820

    0

    Posted July 19th, 2019 10:00

    Hi @rjnd ,

    Seems like your T7500 installed with a LSI Logic SAS1068E-1R RAID card with no hard drive connected. Is your new SSD connected to the on-board SATA port only? If so, you may simply remove the RAID card.

    s-l225.jpg

  • rjnd

    2 Posts

    1807

    0

    Posted July 22nd, 2019 00:00

    Yes, the ssd card is directly connected to data port. Looks like that is the answer. Thank you One last question, after removing the card, should I uninstall or disable anything from bios? Thank you again. 

  • bmcowboy

    4 Apprentice

    573 Posts

    1801

    1

    Posted July 22nd, 2019 00:00

    Hi @rjnd,

    No further configuration needed on BIOS or Windows. Just remove the RAID card is good enough.