UNSOLVED

RaniDog

updated

8 years ago

R

RaniDog

1 Message

0

1163

March 21st, 2019 23:00

Dell Precision M6800 Screen Issues

Have a DELL M6800 Precision mobile workstation and  E-Port Plus Advanced Replicator (USB 3.0) with a dual screen Dell setup, which were purchased at the same time.

Replicator has worked well and had no issues until recently when the No1 Video port stopped working.  Intermittent at first then total failure of port.

Screens checked OK checked by swapping the video connections around so I assumed it was a replicator problem.

Put the issue down to an age related issue and moving from various locations so bought another E-Port Plus Advanced Replicator (USB 3.0) from EBay which worked properly.  

However the Port 1 on this replicator also failed.  Seems too much of a coincidence  that the same port on a second replicator also failed in a similar manner.

Could this be a  video card issue?  Or is there something else?

Any assistance welcome.

  • sfortin

    2 Intern

    •

    199 Posts

    1071

    0

    Posted March 23rd, 2019 03:00

    Suspicious - I'd do some investigation of the cable, the adapter (if there is one) and monitor. What if the docks are not bad, but your cable is not attached well to the monitor, or if using some adapter, the adapter is failing, an intermittent cable, or the specific monitor is having issues?

    Time to start swapping pieces out, or flipping the monitors to see if it's a HW issue outside of the laptop and dock.