UNSOLVED

q4tee2

updated

22 years ago

Q

q4tee2

2 Posts

0

7625

April 15th, 2005 03:00

AIO 962

I purchased my printer about 6 weeks ago.  Everything was fine until 2 days ago.  Now when I scan or copy, all I get is a black page.  When I print, it comes out fine.  Any suggestions???
  • 153

    0

    Posted April 15th, 2005 13:00

    Do you have it set to scan in color? You can set that option on either the printer itself or with software. Also, check to make sure that it's not set to scan a document. I think when it's trying to scan text, it's set to black/white on default.
  • q4tee2

    2 Posts

    153

    0

    Posted April 15th, 2005 14:00

    I tried everything.  It does the same if I'm scanning pictures or text.  Is there perhaps a bulb or something that could've burned out?
  • Sean_thebest

    170 Posts

    153

    0

    Posted April 15th, 2005 15:00

    I feel if its showing black page then your guess is right, the scanner beam/light might have gone bad. Speak to tech support if its under warranty, they would replace it with no hassles.

    Things you can try

    1. Verify that the page is placed face down on the scanner bed.

    2. Disconnect and reconnect the printer power supply.

    3. Verify the darkness and quality settings, perform the following steps:

      1. Press the Options/Menu button until Lighter/Darker is displayed.
      2. Press the (-) or the (+) button until the asterick is in the middle of the display.
      3. Press the Select button to save the settings.
      4. Press the Copy Quality button until Normal is displayed.
      5. Press the Select button to save the settings.
    4. Clean the scanner bed.

    5. Download firmware from this link by clicking I agree http://tinyurl.com/46ng6