UNSOLVED

dandelion25

updated

12 years ago

0

35096

July 6th, 2014 12:00

Printer P713W issues

I am no longer able to scan on this printer. I get the message "Cannot retrieve scan applications list from computer".  I followed some other threads about this and tried the things suggested including uninstalling and reinstalling the printer and now I have an additional problem that the wireless connection doesn't work. The computer recognises the printer but the printer doesn't recognise the computer unless it's plugged into the USB port. It says "no configured computer found".

Using Windows 8.1 on an Inspiron 15R

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    403

    0

    Posted July 7th, 2014 09:00

    dandelion25,

    Did you try powering off your modem, wireless router(if any) computer and printer for 30 seconds, then power them back on, wait for them all to connect and try it?

    Try reading...

    Scan or Copy Problems on the Dell V313, V313w, V515w, V715w or P513w All-in-One Inkjet Printer

    Rick

  • 403

    0

    Posted August 10th, 2014 03:00

    Yes, none of this resolves the issue.


    After I posted the original issue, the printer did temporarily scan when connected via USB, however it is no longer doing that either. 

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    403

    0

    Posted August 10th, 2014 20:00

    dandelion25,

    Try these tweaks???

    Start, control panel, device manager.

    Go to the USB Controller section and click the + sign.

    Go to each USB Root Hub and right click on it, left click properties, left click power management. Uncheck the box, allow computer to turn off this device to save power.

    Restart your computer.

    --------------------------------------

    Start, control panel, device manager. Click on Network and then right click on your wireless adapter, left click properties, power management. Uncheck the box, allow computer to turn off this device to save power.

     

     

    Rick

  • 403

    0

    Posted August 24th, 2014 02:00

    Thanks... so far so good!

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    403

    0

    Posted August 25th, 2014 12:00

    dandelion25,

    Sounds good, keep me posted.

    Rick

  • 403

    0

    Posted September 6th, 2014 16:00

    OK, it's back to not working when using wireless connection. Only working when USB connected.

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    403

    0

    Posted September 8th, 2014 03:00

    dandelion25,

    Using a computer connected to your network, can you run Network Interface and post the information back here.

    Rick

  • 403

    0

    Posted September 14th, 2014 01:00

    There is 1 interface on the system:

        Name                   : Wi-Fi
        Description            : Intel(R) Wireless-N 7260
        GUID                   : 0b36f2fd-ad3d-411e-93f8-8561d74fd2e5
        Physical address       : fc:f8:ae:a5:c8:e1
        State                  : disconnected

        Hosted network status  : Not started

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    403

    0

    Posted September 14th, 2014 12:00

    dandelion25,

    Your Intel(R) Wireless-N 7260 adapter, in your computer, is not connected to the internet.

    Places to look to see if your Connection is enabled

    What virus program and firewall are you using?

    This is a dual band wireless adapter but the printer will only connect on 2.4GHz ONLY

    Rick

  • 104

    0

    Posted September 21st, 2014 07:00

    Sorry, I unplugged the ethernet cable and tried it again and this is what I get:

    There is 1 interface on the system:

        Name                   : Wi-Fi
        Description            : Intel(R) Wireless-N 7260
        GUID                   : 0b36f2fd-ad3d-411e-93f8-8561d74fd2e5
        Physical address       : fc:f8:ae:a5:c8:e1
        State                  : connected
        SSID                   : WNL
        BSSID                  : 10:fe:ed:f0:53:c4
        Network type           : Infrastructure
        Radio type             : 802.11n
        Authentication         : WPA2-Personal
        Cipher                 : CCMP
        Connection mode        : Auto Connect
        Channel                : 1
        Receive rate (Mbps)    : 300
        Transmit rate (Mbps)   : 300
        Signal                 : 99%
        Profile                : WNL

        Hosted network status  : Not started