I need that to backup a lun with RPO near to 0. So I have configured a mirrorview/S with an update interval of one minute.
I have read that WIL luns must to be in a raidgroup.
The private pool may be in a storagepool but is strongly discouraged, specially if it is tiering based or it has fastvp/fastcache or if it contains the source luns.
Finally I used for WIL and for private pool a raidgroup NLSAS raid5, 3 disks, that are the only disk available in the storage.
brettesinclair
2 Intern
•
715 Posts
1257
0
Posted December 10th, 2015 00:00
Hi Matteo,
There's a few recommendations aside from what you have listed;
1 x 2GB LUN for each SP
RAID 1/0 recommended
No FAST Cache
I've always been led to believe that only RAID Groups are supported, so have always used them as opposed to a Pool.
https://emc--c.na5.visual.force.com/apex/KB_BreakFix_1?id=kA1700000000MdD
...however in the article it states that VP LUNs are not supported, but a subsequent point ays that if a Pool is used, disable FAST Cache ?
SAN Copy and MirrorView are quite different products. What's your objective ?