UNSOLVED

smarcum

updated

20 years ago

S

smarcum

6 Posts

0

6939

April 8th, 2007 16:00

CD detection

Hi,
 
I put a CD in the tray, pushed it in, and nothing happened.  When I click on "start, my computer, cd-rw drive"  I get a message that says, "please insert a disk into drive d."  I tried a blank disk in the drive and I got a board giving me options, so that CD is detected.  Any ideas?
 
Steve
  • Predator

    2 Intern

    •

    15286 Posts

    213

    0

    Posted April 8th, 2007 16:00




    Hi Steve,

    Interesting, lets at least take the drivers out of the equation, give you clean/fresh ones.
    Please click on the cD/RW link in my post and scroll to section 15,a rticle 1; Section 20, article 3.Run these two and see if they help.

    Best Regards




    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do
    and the eyesight to tell the difference.



    CD/RW Link

  • Predator

    2 Intern

    •

    15286 Posts

    213

    0

    Posted April 8th, 2007 19:00




    Hi Steve,

    What is the name/model of your optical drive(s)?

    Best Regards




    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do
    and the eyesight to tell the difference.



    CD/RW Link

  • smarcum

    6 Posts

    213

    0

    Posted April 8th, 2007 19:00

    I'm not too knowledgeable about computers.  How/where do I find out the name of my optical drive?
     
     
  • smarcum

    6 Posts

    213

    0

    Posted April 8th, 2007 19:00

    Hi Jeff,
     
    Thanks for the help.  I played a cd and had no problem.  It's an instructional dvd that keeps getting me the "please insert a disk into drive d" message.  I played the dvd on another computer a few days ago and if worked just fine. 
     
    Should I still follow the driver advice in the first article?
     
    Steve
  • Predator

    2 Intern

    •

    15286 Posts

    213

    0

    Posted April 8th, 2007 19:00

    Hi Steve,

    You can use Device Manager to gather the information.
    To access Device Manager, use any of the following methods:
    • Click Start, click Run, and then type devmgmt.msc.
    • Right-click My Computer, click Manage, and then click Device Manager.
    • Right-click My Computer, click Properties, click the Hardware tab, and then click Device Manager.
    Once there, click the "+" next to DVD\CD-ROM drives and list the name/model of the drive(s)

    Best Regards,

    Jeff
  • smarcum

    6 Posts

    213

    0

    Posted April 8th, 2007 20:00

    Looks like HL-DT-ST CD-RW GCE-8160B
  • smarcum

    6 Posts

    213

    0

    Posted April 8th, 2007 20:00

    Jeff,
     
    Thanks so much.  I kept wondering what I was doing wrong.  I really appreciate your time.
     
    Steve
  • Predator

    2 Intern

    •

    15286 Posts

    213

    0

    Posted April 8th, 2007 20:00




    Steve my friend, this drive is a standard CD/RW drive, it does not support reading DVD media. If it will read CD media and read/write CD-R & CD-RW media then your drive is working properly.
    Here is your User Guide:
    GCE-8160B

    Best Regards




    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do
    and the eyesight to tell the difference.



    CD/RW Link

  • Predator

    2 Intern

    •

    15286 Posts

    213

    0

    Posted April 8th, 2007 20:00




    You are welcome Steve!

    Take care




    God, grant me the senility to forget the people I never liked anyway,
    the good fortune to run into the ones I do
    and the eyesight to tell the difference.



    CD/RW Link