UNSOLVED

frazser1

updated

20 years ago

F

frazser1

1 Message

0

25024

January 23rd, 2007 00:00

Computer does not reconize the second processor.

Hoping someone could help in this problem while I wait for Dell help support to answer. Was advise by Dell Help Chat that my Hard Drive was bad. A contracted Dell service person installed a new Hard Drive that was pre-loaded by the factory. Soon there after I noticed that my computer was using only one processor.I have an Intel(R) Core(TM)2 6300 @1.86 HMz. Prior to the Hard Drive crash my computer was doing two units of work for SETI. Now it only does one unit of work.

Device Manager show two processors, Task manager shows only one processing. Any ideas?

Computer is an E520, Windows XP Media Center Edition, 1 GB RAM
  • mombodog

    2 Intern

    •

    12735 Posts

    889

    0

    Posted January 23rd, 2007 03:00

     
    Can you get both processors showing activity in Taskman by running two or more processor intensive programs at once?
  • frazser

    99 Posts

    889

    0

    Posted January 23rd, 2007 14:00

    No, I brought up a number of programs and still only one graph. But I don't have any real intensive programs. SETI uses 98 to 99 % and drops down just a little when I bring up some office programs. Before the hard drive crash and the installing of a new hard drive (by dell) I was working two units at a time.

    omething doesn't seem right with your configuration. Another verifier for you:

    Open Task Manager (right click on the task bar and click on Task Manager). Click on the Performance tab. Click on View (from the drop-down menu), then select CPU History, and make sure "One graph per CPU" is selected.

    How many graphs do you see in CPU Usage History? If you only see one, then Windows is not using the second processor properly. If you see two, then the problem lies with BOINC on not Windows.

    If you do see one, open the Windows Device Manager, and open the "Computer" tree. What does it show there? Does it read "ACPI Multiprocessor PC" or does it say something about Uniprocessor? If it shows Uniprocessor, then Windows was not installed properly and you are not using the multiprocessor Hardware Abstraction Layer (HAL).

    This is what I got from the SETI forum...I only show one graph and under the computer tree it shows ACPI Multiprocessor PC.
  • mombodog

    2 Intern

    •

    12735 Posts

    889

    0

    Posted January 24th, 2007 01:00

    Enter the Bios and be sure both cores are enabled.
  • frazser

    99 Posts

    889

    0

    Posted January 24th, 2007 09:00

    I believe that is the trouble. Got into set-up under Processor type and under the information it states "none of these fields are changeable".

    . Press F2 enter into set-up Press down arrow until Processor Information
    This is what is shown:

    Processor Type =Intel(R) (TM)2Core2 CPU 6300 @
    1.86GHz
    Processor Speed = 1.86 GHz
    Processor Bus Speed =1066 MHz
    Processor L2 Cache =2 MB
    Processor ID =06F6
    Multiple Core Capable = Yes (Dual)
    HyperThreading Capable = No
    64-bit Technology = Yes (Intel EM647)


    None of these fields are changeable.


    Am waiting for answer from one of the Dell Rep.
  • mombodog

    2 Intern

    •

    12735 Posts

    889

    0

    Posted January 24th, 2007 15:00

    What model is this Dell?
  • frazser

    99 Posts

    889

    0

    Posted January 24th, 2007 18:00

    Dell E520 which is on the case.
    Under System Properties it is listed as Dell Dimension DM061.
  • mombodog

    2 Intern

    •

    12735 Posts

    889

    0

    Posted January 24th, 2007 19:00

    Did you check the Performance section of the bios for cpu options?
  • frazser

    99 Posts

    888

    0

    Posted January 25th, 2007 01:00

    Performance Option read like this:
    Multiple Core Option


    Off On (On is hight lighted)

    Off = disable multiple CPU Core technology
    On= Enable Multiple CPU Core technology

    The factory default setting is on.



    My last reply to the Dell people is this:

    This is my second answer to this message.

    I hope this can help you solve this problem if it is part of it.

    While looking at my computer screen I saw under My Recent Documents :DMI BOIS

    Not knowing what this was I opened this document and this is what it shown and I have very little knowledge of some of the computer stuff:

    c:\i386 COMPDATA DMIBIOS.htm

    The software for IBM DMI BIOS Instrumtation might not be compatible with this version of Microsoft Windows and will be disabled during the upgrade. You should uninstall this software for a complete solution.

    For more information about this software, or to obtain a version that runs this version of Microsoft Windows, visit manufacture's web site.

    For more information about system management solutions, visit manufacture's web site.

    For a list of software supported by this version of Microsoft Windows, see Microfosoft Windows XP compatibility list at http://www..microsoft.com.



    Is it possible that the wrong version of Windows was installed on the new Hard Drive that was send to me and installed by your contracted service rep?



    And that is how I stand on this problem.

    Thank for you assistance in this matter.
  • mombodog

    2 Intern

    •

    12735 Posts

    888

    0

    Posted January 25th, 2007 01:00

    Interesting, keep us posted please. 
  • frazser

    99 Posts

    455

    0

    Posted January 25th, 2007 02:00

    Thanks, I will.



    Join the US Navy team
    http://boinc.setiatwork.com/team/stats.cgi?teamid=110052