Announcement Banner
UNSOLVED

christyh_a26c4f

updated

20 years ago

0

13496

April 17th, 2006 15:00

insp. 1150 making noises please help

 have a 1150 insp. it is about 2 yrs out and recently it stopped working.  it will go as far as to the boot screen that has 1150 insp on it and its able to run boot setup and bios.  The hard drive was making horrible horrible noises so i switched the hard drive out.  When i go to reinstall windows it gives me a hard drive error then makes a diff noise only when the error pops up, like a clicking noise. any ideas?i also ran test, the only error code it came up with is: start dst short test fail, errorcode1000-0143 unit 2 drive smart read command failed
  • bacillus

    2 Intern

    •

    14378 Posts

    238

    0

    Posted April 17th, 2006 17:00

    "dst short test fail, errorcode1000-0143" indicates a bad hard drive.
  • 238

    0

    Posted April 17th, 2006 17:00

    i switched the hard drives out
  • bacillus

    2 Intern

    •

    14378 Posts

    238

    0

    Posted April 17th, 2006 17:00

    that hdd is bad!
  • 238

    0

    Posted April 17th, 2006 18:00

    now when running diog. from recovery disk its saying error code 0f00:0244 msg. Block 8896656,8912045, uncorrectable data error or media is write protected
     
     
    *sighs*
  • 238

    0

    Posted April 17th, 2006 18:00

    also 0f00:0240 block 9108939 address mark not found or media error
  • 238

    0

    Posted April 17th, 2006 19:00

    Two solutions
    -low format works often
    -buy a new HD (simple )
  • 238

    0

    Posted April 17th, 2006 19:00

    Stop reading your messages on the computer and start reading the one on the forum !
  • 238

    0

    Posted April 17th, 2006 19:00

    stop:c0000221 unkown hard error\systemroot\system32\ntdll.dll   everytime i try to reformat the new drive
  • 238

    0

    Posted April 17th, 2006 23:00

    ok so i just replaced the hard drive again, and still it will not format to windows, same error messages, read test errors and verify test errors......dunno what to do now