Solved!
Go to SolutionJ
jeesonmathew
32 Posts
0
1343
February 27th, 2013 04:00
lun showing different status
please find the attachment... can u please help me to find out why its coming so ??
697
0
Posted February 27th, 2013 04:00
run "symcfg discover" for good measures
701
0
Posted February 27th, 2013 04:00
symcfg scan will be enough ???
697
0
Posted February 27th, 2013 04:00
i already run the symmask -sid xxx refresh
697
0
Posted February 27th, 2013 04:00
dynamox: its masked to the wwn in same fa, it is in RW state
697
0
Posted February 27th, 2013 04:00
can you run "symmask -sid refresh" and "symcfg disco" and then check?
701
0
Posted February 27th, 2013 04:00
it will take more time ???
697
0
Posted February 27th, 2013 04:00
so it is masked to the WWN on that FA, is it write-enabled ?
410
0
Posted February 27th, 2013 05:00
E:\Program Files\EMC\SYMCLI\bin>symmaskdb list assignments -dev 0d67
Symmetrix ID : 000290105806
Device Identifier Type Dir:P
------ ---------------- ----- ----------------
0D67 50014380167a23ca FIBRE FA-8D:0
5001438000c1c524 FIBRE FA-8D:0
50014380167a23c8 FIBRE FA-9D:0
E:\Program Files\EMC\SYMCLI\bin>
701
0
Posted February 27th, 2013 05:00
it depends how many arrays you can see from this host (plus ones visible via RDF), but should not take very long.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
1058
0
Posted February 27th, 2013 06:00
0D67 is mapped to 9D:0 ?