UNSOLVED
Scsi error..........
Hi ,
we have ventura blade, and server is connected with single path to the storage.
we are getting bunch of scsi error on server.
check the switch log.
2010 Jan 28 21:10:34 %FLOGI-5-MSG_PORT_LOGGED_OUT: %$VSAN 100%$ [VSAN 100, Interface fc1/15: mode
] Nx Port 20:00:00:25:00:00:00:00 logged OUT.
2010 Jan 28 21:10:40 %FLOGI-5-MSG_PORT_LOGGED_IN: %$VSAN 100%$ [VSAN 100, Interface fc1/15: mode ]
Nx Port 20:00:00:00:00:00:00:00 with FCID 0x820044 logged IN.
following is the server log.
Jan 28 16:21:44 kernel: qla2xxx 0000:07:00.0: scsi(0:0:0): Abort command issued -- 1 4353 2002.
Jan 28 16:21:44 : qla2xxx 0000:07:00.0: scsi(0:0:0): Abort command issued -- 1 4354 2002.
Jan 28 16:21:44 : qla2xxx 0000:07:00.0: scsi(0:0:0): Abort command issued -- 1
HBA is constally flaping on switch.
Rightnow server is login on fa port.
This is the case of Boot from SAN.
have you attempted to swap things such as port on the switch, port on the patch panel (if any), cable ? How's the blade connected to your fabric ?I know it's kind of tough with only one path to the storage but you will need to bring systems down to replace/test these components.
JasonBailey
147 Posts
597
1
Posted January 29th, 2010 03:00
can still be hba cable or gbic
Boom1
131 Posts
597
0
Posted January 28th, 2010 13:00
it is on new UCS from cisco. so connection through FCOE
bunch of other server is connected with port only one server has problem so cannot reset port.