Help

Announcement Banner
Start a discussion

modaslam

updated

16 years ago

Solved!

Go to Solution
M

modaslam

2 Intern

•

217 Posts

0

1884

January 9th, 2011 23:00

Support Matrix for OR

Do we have support Matrix which show which is the minimum and latest levels supported for Open Replicator for data migration from third party array(HDS) to EMC Clariion, DMX etc...

  • S

    sauravrohilla

    859 Posts

    1009

    0

    Posted January 10th, 2011 23:00

    This is the list of all supported Arrays with ORS. You can check you model number.

    No. Storage Array Information Management Software Interoperable Storage Array Comments
    1 EMC Symmetrix VMAX;

    NEC Symmetrix VMAX    		 EMC Open Replicator 7.1 3PAR InServ: E200, S400, S800;

    EMC CLARiiON: AX100, CX200, CX3-40c/CX3-20c,  CX3-80/CX3-40(F)/CX3-20(F), CX300, CX4-120/CX4-240/CX4-480/CX4-960,  CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8,  CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X5, 6, CX600/CX400, CX700/CX500, FC4700;

    EMC Celerra: NS-120 (Native Block), NS-480 (Native Block), NS-960 (Native Block)3, 4;

    EMC Symmetrix: 8000 Series2, DMX-38, DMX-48, DMX/DMX-2, VMAX;

    Hewlett Packard StorageWorks: EMA12000, EMA16000, EVA3000, EVA4000,  EVA5000, EVA6000, EVA8000, MA8000, XP-10000, XP-1024, XP-12000, XP-128,  XP-48, XP-512;

    Hewlett Packard SureStore XP-256;

    Hitachi  HDS: 9910, 9960, 9970V, 9980V, 9990, TagmaStore NSC55, TagmaStore  USP100, TagmaStore USP1100, TagmaStore USP600, Thunder 9520v, Thunder  9530v, Thunder 9570v, Thunder 9585v;

    IBM DS: 4100, 4300, 4400, 4500, 6800, 8100, 8300;

    IBM ESS: 800, 800T, E10, E20, F10, F20;

    IBM FastT: 500, 600, 700, 900;

    IBM SVC;

    NEC Symmetrix: DMX-48, VMAX;

    Sun StorEdge: 9910, 9960, 9970, 9980, 9985, 9990    		 See1
    2 EMC Symmetrix VMAX;

    NEC Symmetrix VMAX    		 EMC Open Replicator 7.1 Pillar Axiom: 300, 500 See1, 7
    1. Open Replicator can only be used with FBA devices via Fibre Channel.
    2. Symmetrix 3630, 3830, and 3930 Fibre Channel configurations are also valid remote storage arrays for Open Replicator.
    3. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 requires minimum Flare revision 04.28.000.5.701 or greater.
    4. CX4-120C8/CX4-240C8/CX4-480C8/CX4-960C8 does not support Fibre Channel connection at 1Gb/s.
    5. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X does not support Fibre Channel connection at 1Gb/s.
    6. CX4-120C8X/CX4-240C8X/CX4-480C8X/CX4-960C8X requires minimum Flare revision 04.29.000.5.001 or greater.
    7. Rquire fix for Microcode and SE for ORS to work with Pillar arrays:
    The Microcode fix is 52900 Rev2
    The Solution Enabler hot fix is v7.1.2.2-1059
    8. For IBMi, ensure 5772.104.93 or 5773.155.107 is loaded at a minimum.
  • S

    sauravrohilla

    859 Posts

    1009

    1

    Posted January 10th, 2011 14:00

    What is the model of your HDS? I know it can migrate data between HDS 9960 and Symm. and ORS can only be use to migrate the data between a Symm and XYZ array. But one side has to be Symmetrix which acts as a control.

    Thanks,

    Saurabh

  • M

    modaslam

    2 Intern

    •

    217 Posts

    1009

    0

    Posted January 10th, 2011 22:00

    USPV
    USP
    9900
    AMS
  • M

    modaslam

    2 Intern

    •

    217 Posts

    1009

    0

    Posted January 11th, 2011 23:00

    thank you Saurabh.

    Where do we get the details is it there in Elab Navigator, because I need to get the details for Clariion too.

Dell Support Resources

Latest Solutions

View More