UNSOLVED

ffdfdfdfdfdfd

updated

5 years ago

F

ffdfdfdfdfdfd

1 Rookie

•

16 Posts

0

1446

November 3rd, 2021 00:00

Disable initial Lifecycle Controller screen via Redfish

How can I disable the lifecycle controller menu screen that loads on initial setup via the Redfish API?

  • DELL-Shine K

    6 Operator

    •

    3042 Posts

    1132

    0

    Posted November 3rd, 2021 02:00

    Can you share the server model and iDRAC FW version you have on the server? I am not sure which LifeCycle Controller screen you are referring here. Is it F10 option to launch Life Cycle controller or Collect System Inventory which happens towards end of the POST.

  • ffdfdfdfdfdfd

    1 Rookie

    •

    16 Posts

    1129

    0

    Posted November 3rd, 2021 03:00

    this is a PowerEdge R6525, iDRAC 4.40.10.00. i get shown this menu automatically when the server boots up. anyway to disable it via API?

    ffdfdfdfdfdfd_0-1635933962426.png

     

  • Dell- Maria J

    4 Apprentice

    •

    278 Posts

    1123

    0

    Posted November 3rd, 2021 05:00

    Hello ffdfdfdfdfdfd,

     

    Have you already installed OS? Is it initial server deployment?

     

    Thank you

    Maria Januszka

    #IWork4Dell

    Dell | Social Outreach Services - Enterprise

  • ffdfdfdfdfdfd

    1 Rookie

    •

    16 Posts

    1115

    0

    Posted November 3rd, 2021 09:00

    yes, it's an initial deployment. using the redfish api.

    i already have the virtual iso attached and it's supposed to boot into the iso.

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    1111

    0

    Posted November 3rd, 2021 10:00

    Hello ffdfdfdfdfdfd,

     

    I am not familiar with Redfish scripting, but the only time I've seen the server boot to the LCC screen constantly is because the LCC had a job scheduled, like a firmware update or something else, that did not complete successfully.

     

    First step to stop the LCC screen coming up on boot:

    -boot to F2 -> System Setup -> iDRAC Settings -> Lifecycle Controller to check status

    -Choose: Lifecycle Controller set to Enabled

    -Collect System Inventory on Restart set to Enabled.

    -Cancel Lifecycle Controller Actions set to Yes.

     

    Then I'd recommend try a local install either with the LifeCycle OS Deploy or  if the OS has native drivers for the server components boot to OS install media pressing F11 on boot to select the boot option.

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!