You can use the UNITY designer on the PS apps website. It will take the telemetry file inside the data collection zip and provide a report on the layout, config, connections, etc. Sometimes you have to fake it out and put a "gz" on the end of the tar file, but otherwise it will spit out a report like you are probably used to from submitting SP Collects. MiTrends will do this as well for another avenue of an as-built type of report.

My apologies .. I had not seen your reply.  Can you tell me where the PS apps website is located?

Please remember that I am an EMC Partner and do not have access to internal EMC site.

Thank you so much again for your reply.

Cheers

Its is available to partners, however access is managed by the partner org, you would have to have Unity certs etc.

Partners can request access by opening a SR with the partner team, and they grant / deny access based on their criteria.

Partner Central users, please submit your query via the "Cases" tab from Partner Central.

Non-Partner Central users, please submit your query by using the webform.

Hi,

Where in the Unity Designer page do you upload the Data Collection ZIP file?

Thanks

D

In the landing page you should see a sad panda saying there are no projects, with an "add project" button under that.

If not: show all projects > add project > activity = configuration

Then from there go to uploads on the top left.

Hi Andre,

Thanks for your reply.

I think I may be using a different too, I don’t see a san panda on the landing page.

I am using the Midrange Sizer, form the link below, and selecting system designer tab on the left but I don’t se any options for projects.

Could you send a link to the tool which you are using?

Thanks

https://midrangesizer.emc.com/?lang=en-US

yes its a different tool than midrangesizer

for requesting access use the links that Andre posted in his reply from 2/17

I´m reading your reply, but I don't fully understand how can I download the UNITY designer... Could you explain me more about it?

Unity Designer is a web based tool that is available for Dell EMC employees and partners

IF you are a customer please contact your local Dell / partner contact

I'm a partner, so what is the process to download the Unity designer?