Hi Isaka,

Yes that did resolve the issue with NULL values.. Thanks.

Another observation is for this particular volume replication was stopped.  I added the formula util.ReplaceNan to my report and now for the 1 day/realtime/average I see the values are 0.  But at the layer up, where I have a status bubble - it is showing the last transfer value of 435MB instead of 0.  This level report is set to last day/1 hr/last.

I thought if it polled the last 1 hr = which is 0 that is what should be represented on the status report.

Any idea?

Hi Lisa,

There's a few things that can explain this difference;

The selected period :

               Current day is the current calendar day eg.:Sept 5 00:01 to Sept 5 00h00

               Last day is the previous 24 hours period eg.: Sept 4 09:00 to Sept 5 9h00

               Previous day is the previous calendar day: eg.: Sept 4 00:01 to Sept 4 00h00

So when you are looking at last day 1 hour aggregate last; you are looking at the last hourly aggregated value of the previous day... which can differ from the current day real time average.

hth

regards,

Isaka

Hi Isaka,

Thanks for detailing that out, I believe I had a handle on those polling's.

My intent it the following:  Show the status of Replication (metric is throughput) over the last 24, taking the last hourly aggregate and representing that value ( last 1 hour aggregate) in a status bubble report by volume.  So if I am looking at the last day - 9/5 09:00 to 9/6 09:00 I should see the last HR aggregate reading reflected in the status bubble so 9/6/ 08:00 to 09:00 time period, correct?

I have a volume that the underlying graphic shows "0" throughput for the LAST 1 HR,  but my status bubble does not reflect that.  The bubble shows the last positive value of throughput, which happened 8 hrs prior to "0" throughput.

Thanks

Lisa