Solved!
Go to SolutionD
douglas_carson2
21 Posts
0
1989
June 25th, 2010 07:00
CX310 VMware SRM
Hi Guys,
I am looking at SRM and just wanted to double check the software required to allow test, and full failvoers for SRM.
As far as i am aware i would need:
- Mirrorview/a or mirrorview/s
- Snapview
- EMC Solutions Enabler
- SRA
Am i missing anything?
I know this is a depends question, but are there any guides on powerlink to guage the size of snapshots if snapview has to be implemented?
Thanks
DC
douglas_carson2
21 Posts
592
0
Posted June 29th, 2010 00:00
Thanks Dave,
I will be aving a look a the MVIV looks pretty nice.
Thanks
Douglas
DaveHenry1
121 Posts
592
0
Posted June 29th, 2010 10:00
Douglas,
Great! Once you've tried it out, be sure come back here and post about your experiences with MVIV. I'm sure other folks would find it useful.
-Dave
DaveHenry1
121 Posts
592
0
Posted June 28th, 2010 09:00
Douglas,
Your software list looks complete. If you also want to automate the SRM failback (and not just the failover and testing), you'll need one additional piece of free software: MirrorView Insight for VMware -- but it's included in the SRA bundle that you'll download, so you should be all set with that, too.
For a starting point on SnapView configuration, there's a white paper titled, "EMC CLARiiON SnapView Snapshots and Snap Sessions Knowledgebook, A Detailed Review".
Hope this helps!
-Dave