UNSOLVED

KurtAllen

updated

10 years ago

K

KurtAllen

3 Posts

0

1307

June 23rd, 2016 00:00

Adding LUN in Windows 2012R2 Server

Hi Expert,

Our vendor setup our EMC VNX 3300 to have iSCSI logical drive and connect it to Windows 2012R2 Server.

So i have C:\ -  Physical Drive

               D:\ - 500GB LUN

               E:\ - 500 GB LUN

               F:\ - 500GB LUN

Everything works fined until yesterday the server got restarted and didn't boot-up to windows 2012 server

It seems that the OS was corrupted so i decided to reinstall the OS.

Now i am facing a problem in which i really don't know how to do it to reconnect all our logical drive from EMC to Windows 2012r2 server

I didn't do any changes from EMC iSCSI storage.

Hope someone can give the right directions to do this. Thanks in advance

  • umichklewis

    4 Apprentice

    •

    1190 Posts

    735

    0

    Posted June 23rd, 2016 06:00

    Did you receive any documentation from your vendor?  Most likely, they configured CHAP authentication for the iSCSI LUNs.  If CHAP was used, you'll need to find the right authentication to make that work.

    Can you contact your vendor for assistance?

  • KurtAllen

    3 Posts

    735

    0

    Posted June 25th, 2016 03:00

    Thank you Karl for your reply.

    I tried to workaround. i was able to connect iSCSI Initiator from Windows 2012 to EMC Server but i didn't show-up any disk from Disk Management.

    I checked the Storage details from EMC server, CHAP status is not configured.

    Is there any step i missing? Thanks again

  • KurtAllen

    3 Posts

    735

    0

    Posted June 26th, 2016 01:00

    Now i solved my problem. I type a wrong server name. After i changed it with the correct server name and reconfigure the iSCSI initiator, it shows all my LUN disk storage.

    Thanks again.