Help

Start a discussion

errevi_mancio

updated

3 years ago

Solved!

Go to Solution
E

errevi_mancio

1 Rookie

•

106 Posts

0

3747

April 25th, 2011 02:00

problem configuring aggregation

Hi,

I'm configuring networing on a new vnxe 3100, When I try to setup aggregation I always recive this error

"The changes could not be applied, the following error was encountered:

The system encountered an unexpected error. Record the error code and go to the Product Support Page for all your support options. (Error Code:0x6000003)"

I've tried to setup aggregation on several interface but the problem is always the same.

Is it possible to configure networkin it via ssh or cli?

another question, withc type of lacp or etherchannel shoul I configure on switch?

Thanks

Matteo

  • E

    errevi_mancio

    1 Rookie

    •

    106 Posts

    1714

    0

    Posted April 26th, 2011 08:00

    Hi,

    Today a Emc support man has solved the problem. He've changed some line in a config file in service mode via ssh.

    thanks

    Matteo

  • S

    Shivanand1

    70 Posts

    1714

    1

    Posted April 25th, 2011 03:00

    Hi Matteo,

    Please log a service request for the issue with configuring LACP.

    Please use the URL https://supportbeta.emc.com/servicecenter/servicecenter_landing.htm for raising a service request.

    To take the advantage of port redudency ie configuring LACP, you must be configure it from both VNXe as well as from switch.

    Regards

    Shivanand

  • E

    errevi_mancio

    1 Rookie

    •

    106 Posts

    1714

    0

    Posted May 17th, 2011 07:00

    Hi,

    the SR was resolved in 10 minutes.

    bye

    Matteo

  • S

    SHSTechy

    1 Message

    1714

    0

    Posted May 17th, 2011 07:00

    I have the same issue, how long did it take to resolve?

  • M

    mtg82814

    35 Posts

    1714

    0

    Posted June 1st, 2011 19:00

    Can you share with us the fix that enabled link aggr?

    Thanks.

  • D

    DynaDin

    138 Posts

    1714

    0

    Posted June 1st, 2011 19:00

    This problem is fixed in Service Pack3. Please install it.

    -Dinesh.

  • M

    mtg82814

    35 Posts

    1714

    0

    Posted June 3rd, 2011 12:00

    I installed SP3 (2.0.3.13400).  I have the same exact problem, SP3 did not help.

    I'm going to call support to have them get this fixed.

  • N

    nimavat

    1 Message

    0

    0

    Posted December 21st, 2023 12:28

    @errevi_mancio​ can you help me??

    I got error..

    The changes could not be applied, the following error was encountered:

    The system encountered an unexpected error. Please go to Support > Need more help? > Live Chat to chat with EMC support personnel. If this option is not available, contact your service provider.
    (Error Code:0xc000f0)

  • DJ

    DELL-Josh Cr

    Community Manager

    •

    9784 Posts

    •

    45074 Points

    0

    0

    Posted December 21st, 2023 13:54

    Hi,

    Thanks for your question.

    Do you have any other errors in the logs? The best option is to do what it says and call phone support so they can take a look.

    Let us know if you have any additional questions.

Dell Support Resources

Latest Solutions

View More