Help

Start a discussion

chamila1

updated

10 years ago

Solved!

Go to Solution
C

chamila1

1 Rookie

•

5 Posts

0

9047

June 9th, 2016 09:00

VNXe1600

Hi All,

We are very new to EMC, we have purchased two VNXe1600 boxes and unable to connect to Unisphere.

To which port do we need to connect the network cable. We tried with both management and ethernet ports but there is no IP assigned. Tried with the connection utility as well but auto-discover doesn't receive an IP. Please help

Thanks & regards,
Chamila.

  • C

    chamila1

    1 Rookie

    •

    5 Posts

    6861

    0

    Posted June 16th, 2016 20:00

    Hi Sonam,

    Thank you for the reply, i will try this and update you.

    Thankyou,

    Chamila.

  • C

    chamila1

    1 Rookie

    •

    5 Posts

    6861

    0

    Posted June 29th, 2016 23:00

    Hi Sonam,

    Successfully connected using connection utility after connecting the SAN to a separate switch. Is it due to broadcast issue?

    Thank you very much.

    Chamila.

  • C

    chamila1

    1 Rookie

    •

    5 Posts

    6861

    0

    Posted June 30th, 2016 05:00

    Hi Sonam,

    I have created a storage pool but when i go to add a LUN create option is grayed out. What could be the reason.

    Thanks,
    Chamila.

  • C

    chamila1

    1 Rookie

    •

    5 Posts

    6861

    0

    Posted July 15th, 2016 01:00

    Hi Sonam,

    The problem was sorted, it was a license issue. Once we activate it i was able to create the LUN but could not assign it to the server because due to power failure the storage has gone to service mode and it gives the below error. Could you please help on this.

    There is a problem with the system software on this Storage Processor (code 0x1b20).

    Regards,
    Chamila.

Dell Support Resources

Latest Solutions

View More