UNSOLVED

PudgyOne

updated

19 years ago

P

PudgyOne

11 Legend

30315 Posts

106638 Points

0

12080

December 22nd, 2007 18:00

Logout hangs

I am having trouble with my computer

Windows XP SP2
Dell Inspiron B130

I installed Comando firewall. I did not like it so I un-installed it. That's when the problems began. It didn't want to un-install fully. Left remnants of MailFrontier, which was never on the computer before. I did a repair using the factory disks. Got everything installed again but now the computer won't shutdown.

I have narrowed it down to this:

Safe mode log out and shutdown work.

Normal mode, log out does NOT work, so computer just hangs there with the background screen and that's it. I have to physically put and hold the power button to shut down the computer.

I first noticed this when trying to restart the computer.

Computer will go into standby and back with no problems.

Computer will go into and out of hibernate, with no problems

Computer will log out and save settings in safe mode only.

Computer will also shutdown and restart in safe mode.

My firewall protection is back to old faithful, Zone Alarm.


Thanks,
  • mombodog

    2 Intern

    12735 Posts

    305

    0

    Posted December 22nd, 2007 20:00

    It could be your user profile that is causing this, try this utility to see if it can help the shutdown problem
     
  • PudgyOne

    11 Legend

    30315 Posts

    106638 Points

    305

    0

    Posted December 22nd, 2007 22:00

    and it did NOT work.
     
    I have tried
     
    This hotfix from Microsoft but it didn't work
     
    I can go online in the safe mode and everything works. I can log out and it will save my settings. I can also restart the computer in the safe mode. I even tried creating an new user profile and it had the same problem/
     
    If I log in in the normal mode, everything works great. It's when I go to log out or sgutdown or restart the computer.
     
    I do NOT get the message, logging out saving settings, all I get is everything acting like it's shutting down, then I get a blank background, not saving settings, no logging out, no shutdown sound. This is where the problem lies.
     
    If I turn on the computer and don't login, I can properly shutdown the computer.
     
     
     
  • RoHe

    12 Elder

    45230 Posts

    172625 Points

    305

    0

    Posted December 23rd, 2007 00:00

    Did you reinstall all the XP updates/hotfixes after the repair/reinstall?

    Are there any error messages in XP Event Viewer at logoff/shutdown? This sounds like a driver issue because it works ok in Safe Mode, when only 'generic' hardware drivers are loaded.

    Ron

    Message Edited by RoHe on 12-22-2007 06:47 PM
  • PudgyOne

    11 Legend

    30315 Posts

    106638 Points

    305

    0

    Posted December 23rd, 2007 19:00

    sfc /scannow
     
    like you suggested. I could shut down the computer, It did the shutdown sound, logged out and saved the settings, then restarted.
     
    I then went back on and when I was finished, I sut it down and it hang again.
     
    I have all the drivers installed from the disk. Nothing is added to the computer. Just like I got it from Dell.
     
    I have a backup of drivers that I had from a while back, I'll try those drivers and see what happens.
     
     
     
  • PudgyOne

    11 Legend

    30315 Posts

    106638 Points

    305

    0

    Posted December 23rd, 2007 23:00

    installed the drivers that I had backed up to no avail.
     
    It sound like a logout problem. If I could fix this, it would be great. If not, I just have to wait until the Holidays are over and then do a clean install. I have some pictures to get off before I do that.
     
    Merry Christmas,
     
     
     
  • maxd

    2 Intern

    2434 Posts

    305

    0

    Posted December 24th, 2007 16:00

    Possible the sound file related to the log-off got corrupt; possibly using another could straighten things out. Don't think the SFC would have picked that up.
  • PudgyOne

    11 Legend

    30315 Posts

    106638 Points

    305

    0

    Posted December 27th, 2007 22:00

    Was very surprised that doing a clean install, I was expecting all the junk programs again. I should have done a clean install some time ago.