A friend of mine has a new inspirion E1505 that has a virus. He did a system restore using the restore disc and manually installed the drivers. There is no original software on his system now, just xp home. He asked me what to do and i asked him why he did't use the partition to restore his system.
My question is, can he still use Ctrl F11 to restore his system back to original settings even after formatting the C drive? He said he only formatted the 80gb partition and not the 25gb partition on the hard drive.
Systems shipped after July 15, 2004 came with Symantec PC Restore. This utility restores the computer to an "as-shipped" condition. If you haven't reformatted, repartitioned, or otherwise modified the master boot record, it should work.
If the Symantec PC Restore utility won't work, but still resides on your computer, a Dell customer has figured out some ways to get it to work again. Note - If you removed this partition, it is not recoverable, cannot be downloaded from the internet, and cannot be shipped from Dell. Click here for ways to fix Symantec PC Restore. Users have also reported that the partition can be restored with Ghost 2003, and Ghost 9 using the '03 capabilities of it. If you boot to the Ghost 9 CD, select Advanced Recovery Taks, select Utilities, then Restore Legacy Image it should work - but you want to verify the image before attempting the restore. It's in a folder called IMG.
Systems that shipped beginning in early 2005 ship without Windows XP. You can contact Dell and request a CD and wait for it to ship, see Contact Us at the bottom of the page. And you'd need the other CDs from Dell or you can't reinstall that particular piece of software.
i tried the Ctrl F11 several times and nothing happened. I told him to contact dell for further information. Thanks for the reply.
Dell won't provide software support. Your friend's install of XP disabled Dell PC Restore, which now has to be repaired to work again assuming he didn't delete that partition.
If the Symantec PC Restore utility won't work, but still resides on your computer, a Dell customer has figured out some ways to get it to work again. Note - If you removed this partition, it is not recoverable, cannot be downloaded from the internet, and cannot be shipped from Dell. Click here for ways to fix Symantec PC Restore. Users have also reported that the partition can be restored with Ghost 2003, and Ghost 9 using the '03 capabilities of it. If you boot to the Ghost 9 CD, select Advanced Recovery Taks, select Utilities, then Restore Legacy Image it should work - but you want to verify the image before attempting the restore. It's in a folder called IMG.
jmwills
2 Intern
•
11984 Posts
197
0
Posted December 31st, 2006 08:00
http://www.goodells.net/dellrestore/index.htm
Systems shipped after July 15, 2004 came with Symantec PC Restore. This utility restores the computer to an "as-shipped" condition. If you haven't reformatted, repartitioned, or otherwise modified the master boot record, it should work.
If the Symantec PC Restore utility won't work, but still resides on your computer, a Dell customer has figured out some ways to get it to work again. Note - If you removed this partition, it is not recoverable, cannot be downloaded from the internet, and cannot be shipped from Dell. Click here for ways to fix Symantec PC Restore. Users have also reported that the partition can be restored with Ghost 2003, and Ghost 9 using the '03 capabilities of it. If you boot to the Ghost 9 CD, select Advanced Recovery Taks, select Utilities, then Restore Legacy Image it should work - but you want to verify the image before attempting the restore. It's in a folder called IMG.
Systems that shipped beginning in early 2005 ship without Windows XP. You can contact Dell and request a CD and wait for it to ship, see Contact Us at the bottom of the page. And you'd need the other CDs from Dell or you can't reinstall that particular piece of software.