UNSOLVED

khd2005

updated

19 years ago

K

khd2005

17 Posts

0

952

November 25th, 2007 23:00

Windows won't start - Help!

This is how it happened: I shut down Windows from the Start menu. During shutdown it went to a blue screen with the message "installing update 1 of 1" alternating with "do not turn off power." After an hour, it was still in this mode, so I turned off the power! When I turned it back on, the Dell logo came up, then the Windows splash screen, then nothing! Black. With the arrow in the middle. Same thing in Safe mode.
 
From talking with tech support it seems likely that I will have to do a compclete reinstall. Adtually I want to do thiss, but first want to save the data on the drive.
 
Has anyone had a similar experience? What did you do? What do you reccommend?
 
I see two possible routes:
 
1. The easiest route sounds like obtaining a bootable CD that I could use to copy the data to an external hard drive. Has anyone had experience with ActiveBootDisk from ntfs.com? With BartPE? Anything else?
 
I hesitate to do this because of the possibility of wiping out the drive. I don't want to put the Windows setup disk in for the same reason.
 
2. The safest route seems to be to remove the drive from my computer, install it as a slave drive in another PC, then copy the files.
 
Will this work? What should I look out for?
 
I would appreciate any advice before getting back to tech support.
 
Thanks,
Ken
 
Details: Dimension 4400, 1.6 MHz, 512 MB RAM, 40 and 80 GB drives, Windows XP SP2
 
 
  • EmKu

    32 Posts

    395

    0

    Posted November 25th, 2007 23:00

    Hello, it is not so sirious like you think ;) I'd got this problem many times and here are some stuffs ;) some experiences from me ;)
    1. If you have the System restore selected, so simply to restore your system to the previous woking condition.
    2. You can use Hirent's Boot or Active Boot Disk to restore all you data before your system getting completly clean with DellSystem Disk Utilyties CD, but I think it's just worth if your HDD has 2 seperated partitions, one is primary and one is extended. Otherwise, while booting from Hirent's Boot CD, select the USB support option in File Manager Utilyties for fully USB External HDD support, with this option you can move all you data into an external HDD in safe.
    3. Try reboot you PC then press F8, select Enable VGA Mode.
    4. The Windows Setup Disk doesn't erase all your third-party softwares, it's just getting all data that include with Windows out and replace with the new ones.
    Try these stuffes, if anyproblems, just post them up and get more help from our Dell members ;) Have a nice day!
  • dunedin

    2732 Posts

    395

    0

    Posted November 26th, 2007 10:00

    Your last resort would be slaving the drive in another machine.  This should work fine and is the usual method used to recover files.  Just remember to change the jumpers on the drive.
     
    Before that see if you can do these
    Press F8 when booting up to get to the Safe Mode Options Screen
    Use Arrow Keys to select
    Last Known Good Configuration
     
    If that does not work, at the same screen select
    'Safe mode with command prompt'
     
    At the command prompt type
    C:\Windows\system32\restore\rstrui.exe
     
    This should open System Restore, so restore to before the problem
  • khd2005

    17 Posts

    395

    0

    Posted December 2nd, 2007 19:00

    Thank you for your replies and encouragement. One of the first things I will do when I get things running again is create a boot disk - something like UBCD. Also, thanks for the tip about the jumper; Mine were cable select, but it was good to check.
     
    Now, here is an update one what I have done and learned. I hope this will help someone else and I hope someone can give me good advice, too.
     
    1. I did put my hard drive into a friend's computer. This enabled me to copy everything (except the Windows directory) onto my external hard drive. I feel much safer now.
     
    2. The reinstallation disk that came with my system hung up on the Adminstrator password. i found out from this forum that Microsoft has a KB article that says the original installation disks will not recognize even the correct password. Doesn't this sound stupid! Fortunately the reinstallation disk that came with my laptop has SP1a; this fixes the error and let me log onto the Recovery Console.
     
    3. The RC seems to me to be borderline useless. It consists of about a dozen crippled DOS commands. All the KB articles just describe the commands and give no indication about what to do with them.
     
    4. After listing some of the commands and running Bootcfg. i typed EXIT. At this point the computer booted right into my Windows! I was surprised and pleased. Everything seemed normal until I discovered that my new USB2 card was not recognized. I booted up several times this way.
     
    5. Since it seemed to be a bootup problem, I went back to the RC and ran Fixboot. This seemed to go OK. I tried Fixmbr, but this said it would probably make the partition unreadable. In what sense is this a "fix"!!!
     
    6. I restated Windows, hoping that the Fixboot had actually fixed something; however now it will not even start the recovery console, so I can't get back to Windows at all!
     
    This where it stands. My friend has newer Windows disks so that will be my next step.
     
    I plan to post the current problem as a new thread.
     
    It is enough to give me Mac envy!
     
  • dunedin

    2732 Posts

    395

    0

    Posted December 2nd, 2007 21:00

    That dire warning that you get after using the fixmbr command is pretty common.
    It's the standard message when the MBR needs fixing! 
     
    Run it anyway if you can get into to the RC
  • khd2005

    17 Posts

    395

    0

    Posted December 4th, 2007 13:00

    Thank you again! I will try Fixmbr if I can get the RC to start again. Right now it gets to the screen that says "Starting Windows..." then stays there.