3 Posts
1
2948
January 29th, 2022 01:00
Aurora R13, AWCC,fan labeling
Hello,
Trying to change my fan curves/speeds but the labeling for each fan in the Command Center is confusing. There are 4 fans total in the machine. There are technically 2 front fans, then one is attached to the CryoTech cooler/is RGB, lastly one top fan.
In the command center they are labeled "Mid Fan", "Top Fan", "Side Fan", "Front Fan". I do not know which is which, can anyone say for sure?
I put a #1-4 in the Fans picture for easier explanations.(example: #1 = Top Fan, ect)
Thanks in advance!
r13 fan labeling in command center
R13 Fans Numbered
No Events found!
ExpressBliss
3 Posts
0
January 31st, 2022 16:00
Dell Support replied as well with the following explanation and manual reference:
"...please refer to page 10 on the service manual below to identify the fans correctly.
https://dell.to/3AHF7AL"
Thank you to all who commented and helped! This is resolved.
F34R
2 Intern
•
436 Posts
2
January 29th, 2022 02:00
Mid fan = bottom front (3)
top fan = top fan (1)
side fan = cpu cooler fan (4)
front fan = top front (2)
ExpressBliss
3 Posts
0
January 29th, 2022 22:00
Hello friend,
Any reference or evidence as to how you came to figure this out? Just curious since I have not been able to locate any info on this, and you cant turn the fans off completely from the command center.
Thanks for your reply.
F34R
2 Intern
•
436 Posts
2
January 30th, 2022 05:00
In AWCC I just turned each fan to 100% and checked the airflow to see which fan was at 100% lol. Not tooooo scientific of course, but it's accurate.