Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

13373

June 12th, 2018 01:00

Aurora-R7, set the front fan speed at 50%, 24/7

​just bought a new Aurora R7 i have 2 Gtx 1080 FE i use the pc for gaming and mining , so leave it running almost 24/7 how can i set the front fan to stay on between 40 or 50% 24/7 from the thermal control , as every time i set it ,it goes back to auto when ever it idles like after 5 min or so ,i have tried( fixed and curve) it always switches back to auto . the reason i wanna do this cause when mining my Gpus temps are between 70 and 74 (on auto)when i crank the fan to 45% the temp falls back to 69. keep in mind i use msiafterburner and i have the power limit set at 75, max temp 72. please advise. thanks in advance.​

8 Wizard

 • 

17K Posts

June 15th, 2018 21:00

5 Posts

June 16th, 2018 01:00

Thank you so much , it was the Inactivity Timer: Never Go Inactive ( it was set to go inactive in 5 min) 

3 Apprentice

 • 

4.4K Posts

June 12th, 2018 11:00

Hi @Snow 11,

Try SpeedFan or HWInfo. The manual adjustment will be reset if at any point the temp goes too high or too low.

8 Wizard

 • 

17K Posts

June 12th, 2018 12:00

Thermal Controller to Manual and then Fixed 50% for Front Fan should work fine.

Remember you have to save to Profile to survive a reboot.

5 Posts

June 15th, 2018 01:00

Saving the profile didn’t work for some reason when the computer idles it brings the fan down to auto 

5 Posts

June 15th, 2018 01:00

I downloaded it , but it gave me a warning that there is another program is in control of the fan speed and that it might cause conflict and possible damage (should i Unistall AW thermal control app )

8 Wizard

 • 

17K Posts

June 15th, 2018 12:00


@Snow 11 wrote:

when the computer idles it brings the fan down to auto 


What does that mean?

You are saying that the Thermal Controller is switching from Manual, back to Auto by itself :Surprise: like while you are browsing the Internet?

Or, by "Idles" do you mean a reboot happened?

5 Posts

June 15th, 2018 14:00

What I mean by it idles ,is when I step away from the computer , but it’s still running, after like 5 min the RGB lighting on the side of the case goes off and the fans that I could (hear which’s set at 50% goes down), and when ever I move the mouse the RGB light goes back on and the fans kick back to what ever I set it to. FWI I went through the power setting couldn’t find anything.

No Events found!

Top