DesktopBrowser

updated

7 years ago

0

11590

October 3rd, 2019 12:00

15 R3, RAM compatibility?

Hey everyone. I'm trying to purchase RAM for my Alienware 15 R3 which takes DDR4. I have a set of Corsair in my cart, but for some reason i feel the need to verify that the RAM will fit into my laptop. Does any DDR4 chip fit into my laptop or is there some other specification like size i need to look up? Here's a link for the RAM i've chosen, i just need to know if this is compatible.

https://www.amazon.com/Corsair-Vengeance-3000MHz-Desktop-Memory/dp/B0134EW7G8/ref=sr_1_3?keywords=DDR4%2BRAM&qid=1570130749&sr=8-3&th=1

  • JOcean

    11 Legend

    12621 Posts

    69453 Points

    10976

    1

    Posted October 3rd, 2019 15:00

    That would be desktop RAM and will not fit on your laptop. The following are the specs for your system. Your RAM would be like the RAM on the Crucial site.

    Table 1. Memory specifications.

    Slots Two SODIMM slots
    Type DDR4
    Speed 2133 MHz, 2400 MHz, and 2667 MHz
    Configurations supported 8 GB, 16 GB, and 32 GB

     

    Dell OEM 15 R3 RAM sticks =
    821PJ 16GB, SODIMM, 2400MHz, 2Gx64, Unbuffered, DDR4, 260 pin, Dual Rank, 1.2V, Non-Error Correction Code
    HYXPX 8GB, SODIMM, 2666MHz, 1Gx64, Unbuffered, DDR4, 260 pin, Single Rank, 1.2V, Non-Error Correction Code, Non-Encrypted
    MKYF9 8GB, SODIMM, 2400MHz, 1Gx64, Unbuffered, DDR4, 260 pin, Single Rank, 1.2V, Non-Error Correction Code

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • RAF65

    137 Posts

    10947

    0

    Posted October 4th, 2019 09:00

    Hi

    Before installed by Dell I had 2x Micron 8ATF1G64HZ-2G6B1

    At present 2x Samsung M471A2K43CB1-CTD (total 32GB)RAM Samsung.jpg

  • HellsDisciples

    2 Intern

    159 Posts

    10926

    0

    Posted October 5th, 2019 01:00

    Those ram sticks are for Desktop... They WILL NOT WORK.

    Do NOT buy. As far as system goes.. if you have any DDR4 over 2400, they will be pointless. You cannot change the XMP profile to anything over 2400. I have a 2666 kit and its locked to 2400 and NOTHING will change that at all.

    https://www.amazon.com/gp/product/B06XQWN7MP/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 work just fine, but again.. they are defaulted to 2400.

  • RAF65

    137 Posts

    10906

    0

    Posted October 5th, 2019 09:00

    Hi

    Only 50/50. In "Setup & specification"  given 2133,2400 AND 2667 MHz.

    But I can agree that there are some not supported.Perhaps yours. I avoid using Ballistix, there is always problem with Ballistix. With mine without.2667 MHz.jpgSetup & Specification.jpg