UNSOLVED
A
AlienwareM15R3
2 Intern
•
22 Posts
0
315
August 12th, 2025 09:10
m15 R3, problem with AWCC, no overclocking
Guys, please help me. I reinstalled Windows 11 on a new drive and installed all the drivers and Dell applications. When I installed the AWCC (Alienware Command Center), I couldn’t control the overclocking feature. It says I need to disable core isolation and the virtual machine. I disabled them and restarted the laptop, but the overclocking controls are still unavailable. What should I do?
(edited)
0
0
Posted August 12th, 2025 13:45
@DELL-Chris M I also installed the driver for the graphics card. But I couldn't find any drivers for the processor.
0
0
Posted August 12th, 2025 13:58
@DELL-Chris M Well, in the task manager it shows: processor, nvidia video card, wifi module, storage devices, RAM just says 16 GB
0
0
Posted August 12th, 2025 13:59
@AlienwareM15R3 namely identified. and not identified is RAM
0
0
Posted August 12th, 2025 16:19
@DELL-Chris M In the device manager all chipsets are defined. Even in system devices. does not show that the driver is not installed
0
0
Posted August 13th, 2025 06:45
@RogeSmith I haven't done a full reinstallation of AWCC yet. What OC Control are you talking about? I haven't been there for the BIOS yet. I'll try to do a full reinstallation. And I can only do control for the video card, but there is no control for the processor and RAM in AWCC
0
0
Posted August 13th, 2025 09:49
I did a complete uninstall on the advice from the Dell website. and installed it, it did not help to restore control of the processor and RAM and video card.
(edited)
2
0
Posted August 13th, 2025 11:58
Guys, what’s the problem? I have an Alienware m15 R3 laptop. I reinstalled the Alienware Command Center application as recommended on Dell’s website, but it didn’t help me restore control over the CPU, RAM, and GPU. The application requires disabling Core Isolation, Memory Integrity, and the Virtual Machine Platform. I have disabled them, but it still didn’t help. What should I do then?
(edited)
9
0
Posted August 19th, 2025 17:18
Guys, what’s the problem? I have an Alienware m15 R3 laptop. I reinstalled the Alienware Command Center application as recommended on Dell’s website, but it didn’t help me restore control over the CPU, RAM, and GPU. The application requires disabling Core Isolation, Memory Integrity, and the Virtual Machine Platform. I have disabled them, but it still didn’t help. What should I do then?
Note: This comment was created from a merged conversation originally titled Re: m15 R3, problem with AWCC, no overclocking
AlienwareM15R3
2 Intern
•
22 Posts
0
0
Posted August 12th, 2025 13:26
@DELL-Chris M Yes, the whole installer installed