Unsolved
This post is more than 5 years old
10 Posts
0
7988
March 8th, 2016 10:00
MS Cluster File System
New to AppSync (running 2.2.2), I am trying to protect a MS Clustered file system. I have looked through the doc's and can not find anything on how to set this up. I have pushed the agent to the 2 hosts but I can not see the clustered drive. So I am guessing I need to add the cluster IP as the server instead of the 2 server IP's. I will try removing them from the gui and just add the CIP.
No Events found!
schifa
82 Posts
0
March 8th, 2016 21:00
You are on the right track...you will have three entries, for a two-node cluster...each node, and the SQL instance. You will then be able to subscribe the database to the Service Plan.
Please also know that with the 2.2.2.x version, mounting to a cluster is not supported. This is expected to change in the 3.0 release, where you will be able to mount directly in to MS Cluster without manual intervention.
hex666
1 Rookie
•
18 Posts
0
March 15th, 2016 06:00
I am having the same issue ; It seems that appsync masks any Clustered own drives; thus preventing from having file system protection; Only drives that I see are quorum and any not clustered own drive.
Any one have any detail on this.
jpesaturo77
10 Posts
0
March 15th, 2016 09:00
Yes, I have resolved this issue. You need to add the Cluster IP/Name as a server. Once you do this you will be able to see any clustered disks.
hex666
1 Rookie
•
18 Posts
0
March 15th, 2016 11:00
I have done thaat and i still only see the Q drive....hmm wonder if i have something not configured correctly
jpesaturo77
10 Posts
0
March 16th, 2016 06:00
Are both nodes up and running? All cluster services good/green? Our server team had 1 node paused and nothing worked until the cluster was healthy.
hex666
1 Rookie
•
18 Posts
0
March 16th, 2016 12:00
yes both Nodes are up and running; Windows 2012 R2 ; so i have a feeling i will be opening an SR.