This post is more than 5 years old
63 Posts
0
2005
Change IP addresses (multi-node gen4s) procedure - V6.1x
hello, I thought the change IP address for Gen4s Multi-node was located in the procedure generator. I cannot find it's location. Does anyone know where to locate it?
rpervan
266 Posts
0
August 22nd, 2013 05:00
just searrch support.emc.com for " Changing the Name and IP Addressing of Avamar Systems Avamar 4.x or Later Technical Note " and you will find it .
DELL-Leo
Community Manager
Community Manager
•
6.1K Posts
0
August 22nd, 2013 18:00
Hey,
Here is the link of "Changing the Name and IP Addressing of Avamar Systems Avamar 4.x or Later Technical Note".
https://support.emc.com/docu7692_Changing-the-Name-and-IP-Addressing-of-Avamar-Systems-Avamar-4.x-or-Later-Technical-Note.pdf?language=en_US
bmurrey-network
48 Posts
0
October 2nd, 2014 09:00
The latest document that covers IP and/or Hostname changes that I can find is Technical Note 300-015-091 and it is called EMC Avamar Post-Installation Network Configuration for Avamar 5.x, 6.x, or 7.x Server Software. Look on pages 6 through 30. The date on this document is May 13, 2014.
Good luck to you.