Hi,

I have not been able to find a manual for this, what info from it are you needing?

i am looking for the user manual and the setup guide for the unit. i have had a look around the knowledge base without much luck. I was able to find these pdf's :https://www.dell.com/support/search/en-nz#q=KTN-STL3&sort=relevancy&f:langFacet=[en]

I thinking that i might need to look at the bigger picture regarding the overall system that the KTN-Stl3 was use in

Hello https://dell.to/3oPp13b,

KTN-Stl3 is an enclosure that can be used with many EMC systems.  In most cases it connects to a VNX system.

Hi

Any controller suggestion to connect a EMC ktn-stl3 to a T610 PE? I was looking for some external PCIe card.

Dan

Hi,

It wasn’t designed for connecting directly to a server and may not work properly.

Hello, the link in this post has rotted. Is there an updated manual link?

Hi,

Thanks for your question. This is the only one I have been able to find now. https://dell.to/46QcAbO

Let us know if there is anything else we can help you with.

I have 5 emc ktn-stl 3 and 4 my friend has 6

Connected by hba card we have same interposers his works with sata and sas mine only sas what's the deal  any help would be great

Hi.

Thank you for your question.

It could be different controllers, 303-104-000E vs 303-108-000E

Let us know if there is anything else we can assist you with.

@DELL-Josh Cr​ we both use    303-115-003D told it controls both sas and sata is there anything with the way things plugged in any piticular order?

It shouldn't be, what controllers are they connected to?

Hba card and interposer 303-115-003D

I think 303-116-003D does SATA and the 15 is SAS.

Wow I was told by a good friend the 115 did both that would explain thank you